6. Operations
Working with Layers
qê~åëáíáçåáåÖ=íç=~=j~ííÉ=`çäçê
The
Use the following steps to transition to a background matte color:
1.Ensure that you have preset the desired transition type and rate. Refer to the "Working with Transitions" section on page 115 for details.
2.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.
3.On the Mode line, select BG — or simply verify that it is already selected.
4.Scroll to the Type line and select Matte. The current background will not change.
5.If you wish to set (or change) the background matte color:
~Press {MATTE} to display the Matte Menu.
~On the menu, adjust the Red, Green and Blue matte values as desired. You will not see the colors change on Program.
6.In the Layer Functions Section, press TRANS. The TRANS button lights during the interval, and at the conclusion of the transition, the Home Menu appears.
qê~åëáíáçåáåÖ=íç=~=iáîÉ=asf=_~ÅâÖêçìåÇ=
The
Use the following steps to transition to a live DVI background:
1.Ensure that you have preset the desired transition type and rate. Refer to the "Working with Transitions" section on page 115 for details.
2.Ensure that your DVI background is properly set up. In Chapter 5, refer to the “Setting up the Background“ section on page 93 for details.
3.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.
4.On the Mode line, select BG — or simply verify that it is already selected.
5.Scroll to the Type line and select DVI. The current background will not change.
6.In the Layer Functions Section, press TRANS. The TRANS button lights during the interval, and at the conclusion of the transition, the Home Menu appears.
qê~åëáíáçåáåÖ=íç=~=píáää=cê~ãÉ
The
Use the following steps to transition a still frame to Program:
1.Ensure that you have preset the desired transition type and rate. Refer to the "Working with Transitions" section on page 115 for details.
2.Ensure that the desired still frames have been captured. Refer to the “Still Frame Capture Overview“ section on page 117 for details.
3.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.
4.On the Mode line, select BG — or simply verify that it is already selected.
|
| 109 |
|
