Barco 26-0405000-00 manual Background/DSK Input, Program Outputs, Ethernet Port, AC Connector

2. Hardware Orientation

PresentationPRO-II Rear Panel

3)Background/DSK Input

One DVI connector is provided for a Background or a DSK Input. The connector accepts only digital video. Please note:

~Using the BG/DSK Input Setup Menu, the connector’s mode can be set to either BG (background) or DSK (downstream key)

~In the BG mode, users can choose between the live DVI input, a matte color or a captured still frame.

~In the DSK mode, users can choose between the live DVI input or a captured still frame.

Important

In DSK mode, the background matte color is still available as a source, and the color itself can be set from the BG Matte Menu.

In Appendix A, refer to the “DVI Connector Pinouts” section on page 125 for pinout details.

4)Program Outputs

Two connectors are provided for Program Outputs:

~One DVI connector is provided for the Digital Program Output. This output is designed for a digital connection to your projector. The output is digital only, and does not include analog pins. In Appendix A, refer to the “DVI Connector Pinouts” section on page 125 for pinout details.

~One 15-pin D connector is provided for the Analog Program Output. This output (identical in content to the digital output) is designed for an analog connection to your projector — or to an analog monitor. In Appendix A, see the “Analog 15-pin D Connector” section on page 126 for pinouts.

5)Ethernet Port

One RJ-45 connector is provided for 10/100BaseT Ethernet communications. When (optionally) connecting the PresentationPRO-II to an external controller, a standard Ethernet hub or switch on an isolated network is recommended. The Ethernet connector is compatible with:

~Standard RJ-45 Ethernet cables

~Neutrik EtherCon® series cables

In Appendix A, refer to the “Ethernet Connector” section on page 127 for pinout details.

6)AC Connector

One AC Connector is provided to connect the PresentationPRO-II to your facility’s AC power source. The integral switch turns the chassis on and off.

7)Serial Ports

Two 9-pin D connectors are provided for RS-232 serial communications with the PresentationPRO-II chassis and for downloading code in the field. In Appendix A, refer to the “Serial Connector” section on page 128 for pinout details.

PresentationPRO-II • User’s Guide 13