Barco 26-0405000-00 manual PÉííáåÖ=ìé=íÜÉ=~ÅâÖêçìåÇ, MêçÖê~ããáåÖ=bafa

5. System Setup

Setting up the Background

pÉííáåÖ=ìé=íÜÉ=_~ÅâÖêçìåÇ

With PresentationPRO-II, you can use the DVI input, a matte color, or a still frame as the background source. Please note:

•The system has one DVI connector (BG/DSK) that can be used for either the Background or the DSK — but not both simultaneously.

•The BG/DSK input (along with a scaled PIP image) is the source of still frames that can be captured and used as the background.

•The function of the BG/DSK input is determined by the “Mode” line on the BG/ DSK Input Setup Menu. When set to BG, the background setup procedures outlined below apply.

Select the procedure below for the type of background that you wish to set up:

•Programming EDID

•Using a Matte Color as the Background

•Using the DVI Input as the Background

•Using a Still Frame as the Background

mêçÖê~ããáåÖ=bafa

The EDID (Extended Display Identification Data) programming procedure is a prerequisite for using a live DVI background or for using the DSK. The procedure guarantees proper communications at the preferred resolution between PresentationPRO-II’s DVI input and your external computer.

„Use the following steps to program the PresentationPRO-II EDID:

1.Ensure that the PresentationPRO-II output format matches your projector’s native resolution. Refer to the “Output Setup” section on page 88 for instructions.

2.Ensure that the computer (or external equipment) that you wish to use as a background source is capable of supporting the selected output resolution.

3.From the HOME MENU, press {SYSTEM} > {EDID} to display the EDID DVI Input Format Menu.

4.Note the Current line, which displays the current EDID video format that resides in PresentationPRO-II memory. If this format is already set to the desired resolution, no EDID programming is required. You can exit this procedure, and continue with other background setup steps as needed.

5.If a new resolution is required, use the ADJ knob to adjust the Format to the preferred setting at which you want to program the EDID.

6.Press {PROGRAM EDID} to program EDID with the new selected video format. A warning message will be shown. Press {YES} to continue.

7.Once EDID programming is complete on PresentationPRO-II, power down the external computer and power it back on.

8.On your PC’s desktop, right-click to display the Display Properties Window.

9.Select the Settings Tab, and set the resolution to match that which you just programmed into EDID.

PresentationPRO-II • User’s Guide 93