5. System Setup
Setting up the DSK
rëáåÖ=~=píáää=cê~ãÉ=~ë=íÜÉ=aph
This procedure enables you to capture a still frame image and assign it as the “type” for the DSK. Please note:
•As a recommendation, capture still frames into “temporary” memory as a setup procedure.
•Once still frames are captured, during live production you can switch the DSK between the DVI input and a Still Frame.
Important
It is highly recommended that you save still frames into “permanent” flash memory as a setup procedure — as this is a very
Use the following steps to assign a captured still frame as the DSK “type.”
1.Ensure that BG/DSK input is properly set up as a DVI source. This input is the source of the still frames which you will capture. Refer to the “Using the DVI Input as the Background” section on page 94 for setup details.
2.In Chapter 6, refer to the “Capturing Still Frames” section on page 117 for instructions on capturing still frames. Up to three frames can be captured into temporary memory: FG_1, FG_2 and FG_3.
3.In the Layer Functions Section, press BG/DSK. The button blinks and the BG/ DSK Input Setup Menu appears.
4.Scroll to the Mode line and select DSK.
5.Scroll to the Type line and select the desired still frame: FG_1, FG_2 or FG_3.
|
| 97 |
|
