Barco 26-0405000-00 manual jçÇáÑóáåÖ=mfmë, Operations, PresentationPRO-II User’s Guide

6. Operations

Working with Layers

4.In the Layer Functions Section, press TRANS. The current PIP transitions off and the new KEY transitions on. The TRANS button lights during the interval.

5.Adjust the Key’s clip, gain, mode, opacity, fill source, size and position, crop, source size and special effects desired. Refer to the “Modifying Keys and DSKs“ section on page 107 for details.

jçÇáÑóáåÖ=mfmë

„Use the following steps to modify a PIP:

S Assumption: A PIP is currently on Program.

1.In the Layer Functions Section, ensure that the PIP button is blinking. If not, press PIP to display the PIP Adjustment Menu. On the Source Selection Bus, the source associated with the PIP will be solid.

2.Size and Position — Adjust H Size, V Size, H Position and V Position as desired. In Chapter 4, refer to the "PIP Adjustment Menu Description" section on page 58 for menu details.

Note

Because the PIP is on Program, it is recommended that you make slow, smooth adjustments during a live production.

3.Source Size — From the PIP Adjustment Menu, press {SRC} to display the Input Source Adjustment Menu. Use the menu to adjust the source image’s size and position within the PIP. In Chapter 4, refer to the "Input Source Adjustment Menu Description" section on page 72 for menu details.

4.Crop — From the PIP Adjustment Menu, press {CROP} to display the Crop Adjustment Menu. Use the menu to select the type of crop, the aspect ratio, and the image’s H and V size. In Chapter 4, refer to the "Crop Menu" section on page 61 for menu details.

5.Border — From the PIP Adjustment Menu, press {BORDER} to display the Border Menu. Use the menu to select the border’s style, color and size. In Chapter 4, refer to the "Border Menu" section on page 60 for menu details.

6.Shadow — From the Border Menu, press {SHADOW} to display the Shadow Menu. Use the menu to choose the shadow’s size, position and transparency. In Chapter 4, refer to the "Shadow Menu" section on page 62 for menu details.

7.Special Effects — From the Border Menu, press {EFX} to display the Image Effects Menu. Use the menu to select monochrome or color mode, to modify chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer to the "Image Effects Menu" section on page 63 for menu details.

8.Global Functions — Remember that the following global functions are always available to you:

~Press Reset to reset the current effect (e.g., PIP, Key, crop, etc.) to a nominal default value.

~Press Full Screen to bring the PIP to full screen, using the source’s height as the defining factor.

~Press Freeze to freeze the PIP. Press again to unfreeze.

104 PresentationPRO-II • User’s Guide