6. Operations
Capturing Still Frames
p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó
Use the following steps to save a captured still into permanent memory.
1.Capture a still as outlined in the previous two sections.
~"Capturing Still Frames from the Background Input" on page 117.
~"Capturing Still Frames from a PIP or Key" on page 118.
Warning
Do not execute the next step during live production. All controls will be locked during the "save" process. It is recommended that you save stills during
2.On the Frame Grab Menu, press {SAVE} to save the captured frame into the selected permanent storage register (FG_1, FG_2 or FG_3). Once pressed, the screen will display an important warning:
System controls will be locked for 2 to 3 minutes while saving.
Save Now?
Figure 6-2. Background Frame Save Warning
~Press YES to save the frame. All front panel controls will be locked for up to three minutes while the still frame is saved.
~Press NO to cancel the procedure.
3.If required, press {DELETE} to delete the selected frame from permanent storage. This button only appears when frames are stored in permanent memory.
|
| 119 |
|
