Belkin F5U006-UNV Installation Procedure for Windows, Installing the Software Drivers continued

P73474-F5U006-UNV-AM-man.qxd 9/18/00 10:10 AM Page 8

Installing the Software Drivers (continued)

Installation Procedure for Windows 2000

1.Turn off the computer and remove the cover.

2.Locate an empty PCI slot and insert the 4-Port USB PCI Card firmly into the slot.

3.Replace the cover and turn on the computer.

4.After loading, Windows will detect “PCI Universal Serial Bus.” The required driver support will be automatically installed. No user input is required.

5.After installation, check the Windows Device Manager to confirm that the 4-Port USB PCI Card has been properly installed. A complete installation will add four “Standard OpenHCD USB Host Controller” entries to the Device Manager List, and four “USB Root Hub” entries.

8