EN 39
Additional settings “ADDITIONAL”
* The default setting is bold in the table below.
“SUPERIMPOSE” | When this function is set to “ON”, various VCR status information |
“ON” | appears on the screen. |
“OFF” | NOTES: |
| |
| ● When you use this VCR as the playback VCR for editing a tape, be sure to set this |
| function to “OFF”; otherwise, the VCR status information |
| recorded on the edited tape. |
| ● If you select a channel on which no signal is received, the channel number is displayed |
| regardless of this function setting. |
|
|
“GRAY BACK” | When this function is set to “ON”, the VCR changes the screen into the gray back screen |
“ON” | automatically when receiving a channel not in use. |
“OFF” |
|
|
|
“POWER SAVE” | When this function is set to “ON”, you can reduce the power consumption. While the |
“ON” | VCR is turned off, the front display panel does not show the clock. |
“OFF” | When this function is set to “ON”, an i.LINK device cannot be recognized. As a result, it |
| is not possible to record a program using the digital tuner’s* timer function. In addition |
| the device does not pass along data if it is in a branched connection. |
| * For details of a digital tuner, refer to the instruction manual of the digital tuner. |
| NOTE: |
| It takes some time until VCR completes its set up when you turn on the VCR. |
|
|
| CONTINUED ON NEXT PAGE A |
