INSTALLING YOUR NEW VCR | EN 5 |
Connections
Another |
|
|
|
| Digital HD Video | |
|
|
| ||||
|
|
|
|
| Camera | |
| Y | P /C P /C |
|
|
|
|
| OUT |
| IN | i.LINK IN/OUT |
|
|
|
| DV IN |
|
| ||
| S VIDEO | S VIDEO | S400 |
|
| |
REMOTE PAUSE/ | AUDIO VIDEO | AUDIO | VIDEO |
|
|
|
AV COMPULINK |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| (for dubbing) | |
|
|
|
|
| [i.LINK IN/OUT] | |
|
|
|
|
| i.LINK cable | |
| Component |
| (not supplied) | |||
AC Outlet |
|
|
| |||
Video Output |
|
|
| |||
AC Power |
|
| To [i.LINK IN/OUT] |
| ||
Cord |
|
|
| |||
|
|
| OUT |
| IN | i.LINK IN/OUT |
|
|
|
| DV IN | ||
|
|
| S VIDEO | S VIDEO | S400 | |
|
|
|
|
|
| DIGITAL OUT |
|
|
|
|
|
| OPTICAL |
| REMOTE PAUSE/ |
| R AUDIO L VIDEO | R AUDIO L | VIDEO | PCM/DOLBY DIGITAL |
| AV COMPULINK |
|
|
|
|
|
|
|
|
|
|
| |
Back of VCR
[AUDIO OUT] 
Audio Cable (supplied)
Preparations
— Check contents
Make sure the package contains all of the accessories listed in ‘SPECIFICATIONS’ ( page 59).
— Situate VCR
Place the VCR on a stable, horizontal surface.
i.LINK Connections
1Make connections
— Connect VCR to TV
1Connect an audio cable between the VCR’s
[AUDIO OUT] connectors and the TV’s audio input connectors.
2Connect a component video cable between the VCR’s Component video output terminals and the TV’s Component video input terminals.
NOTE:
If your TV do not have Component video input terminals, connect the
—Connect VCR to the Digital HD Video Camera (JY-HD10)
Connect an i.LINK cable between the VCR’s [i.LINK IN/OUT] connector and
[i.LINK IN/OUT] connector.
— Connect VCR to another VCR (SR-VD400E)
Connect an i.LINK cable between the playback VCR’s [i.LINK IN/OUT] connector and the recording VCR’s [i.LINK IN/OUT] connector.
TV (HD Ready)
Component Video
Cable (not supplied)
Aerial or cable
NOTE:
Depending on the devices equipped with the i.LINK connector which is connected to the VCR, picture noise on this VCR may differ from the noise on the connected devices. It is caused by the difference of the data processing method.
2 Connect VCR to power source Connect the AC power plug to the AC outlet.
3 Final preparation for use Turn on the VCR.
● You can now perform ‘basic playback’ ( page 8) or ‘editing’ ( page 18).
NOTES:
●When connecting VCR to TV with a component video cable, a menu screen will appear on the TV.
●Use the commercially available i.LINK cable
If the cable used is above 3 m, the operation of this VCR is not guaranteed.
●To view the picture of 480i image format on the TV, connect the component video cable to the TV’sY/CB/CR connectors. If your TV uses both the Y/PB/PR and
●For full identification of the VCR’s rear panel, refer to the Index ( page 56).
●If you cannot see the pictures on the TV screen when you play back a tape, set “TV OUTPUT 1” to the appropriate mode ( page 38).
