10 EN | PLAYBACK (cont.) |
C Adjusting tracking condition
— Tracking Adjustments
Automatic tracking adjustment
This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
D Selecting monitor sound
— Audio Monitor
You can select the desired monitor sound.
While playing back a tape on which stereo sound is recorded, press [A. MONITOR] on the Remote.
Each time you press the button, the sound changes as follows:
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.
● You can also use the manual tracking during slow motion |
playback ( page 15). During slow motion playback, |
simply press [CHANNEL +] or |
| |
L R | L |
MIX
R 
NORMAL 
VCR CH +] or |
1 Activate manual tracking
Press [CHANNEL +] and
2 Eliminate the noises on the TV screen
Press [CHANNEL +] or [–].
●Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.
●To reactivate automatic tracking, press [CHANNEL +] and
“ |
|
| L R |
| ”: Normally select this. |
|
| ||||
|
| ||||
|
|
|
|
| |
“ |
|
| L” |
| : Sound on the left |
|
| ||||
|
| ||||
“R |
|
|
|
| back. |
|
| ” |
| : Sound on the right | |
|
|
| |||
|
|
| |||
|
|
|
|
| back. |
“NORMAL” : Sound on the normal track is played back.
“MIX” | : Both sounds on the |
| track are mixed and played back. |
D-VHS
L R | L | R |
“ |
|
| L R |
| ” : | Normally select this. |
|
| |||||
|
| |||||
“ |
|
| L” | : | Sound on the left channel is played back. | |
| ||||||
| ||||||
“R |
|
| ” | : | Sound on the right channel is played back. | |
|
| |||||
|
| |||||
|
|
|
|
|
|
|
NOTES:
●The above indication appears when “SUPERIMPOSE” is set to “ON” ( page 39), though the monitor sound changes in sequence.
●If the tape being played back has no
