|
|
|
|
|
| EN 49 | |
|
|
|
|
|
|
| |
| OTHER PROBLEMS |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
|
| 1. | The auxiliary input cannot be |
| ● Recording is in progress. |
| Press [PAUSE ( 8 )] to pause the record- |
|
|
| changed. |
|
|
| ing, change auxiliary inputs, then press |
|
|
|
|
|
|
| [PLAY ( 3 )] to resume recording. |
|
|
|
|
|
|
|
|
|
| 2. | The Remote will not operate your TV. |
| ● The brand codes are set incorrectly. |
| Reset the correct brand codes |
|
|
|
|
|
|
| ( page 45). |
|
|
|
|
|
|
|
|
|
| 3. | ÒPMÓ blinks on the front display |
| ● The VCR do not work properly. |
| Unplug the AC power plug once, then |
|
|
| panel. |
|
|
| plug it again. |
|
|
|
|
|
|
|
|
|
| 4. | The subtitles and the menu screen are |
| ● The subtitle display on the TV is set to |
| Set it to off. |
|
|
| overlapped. |
| on. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MOISTURE CONDENSATION
Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditionsÑjust as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR turned on for a few hours to evaporate the moisture before inserting a tape.
ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.
ATTENTION
This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.
