![](/images/new-backgrounds/1230685/23068575x1.webp)
38 EN |
|
| OTHER USEFUL FUNCTIONS (cont.) |
Input/Output settings “IN/OUT FUNCTION” | * The default setting is bold in the table below. | ||
|
| ||
“TV OUTPUT 1” | Select the appropriate mode when receiving signals via i.LINK connector or playing | ||
“720to1080” | back a | ||
“NO CONV.” |
|
|
|
“ALLto480i” | “720to1080” : 720p is | ||
|
| and 480i image formats are output to the TV without being | |
|
| converted. Select this when the 720p image played back is | |
|
| distorted. |
|
| “NO CONV.” | : 1080i, 720p, 480p, and 480i image formats are output to the TV | |
|
| just as they are. | |
| “ALLto480i” | : All images will be output to the TV in 480i image format. | |
| NOTE: |
|
|
| When you receive signals via i.LINK connector or play back the picture of 1080i, | ||
| 720p, 480p image format, the signal is not output from the | ||
| output connector if “TV OUTPUT 1” is set to “720to1080” or “NO CONV.”. | ||
|
| ||
“TV OUTPUT 2” | Select the appropriate mode depending on the type of TV you have. | ||
“WIDE 16:9” | “WIDE 16:9” : Select this for a wide TV set with 16:9 screen image size. | ||
“NORMAL 4:3” | “NORMAL 4:3” : Select this for a TV set with 4:3 screen image size. | ||
| NOTES: |
|
|
| ● When “TV OUTPUT 2” is set to “WIDE 16:9”, sometimes the screen image may | ||
| be stretched vertically. |
| |
| ● When “TV OUTPUT 2” is set to “NORMAL 4:3”, sometimes subtitles may not be | ||
| visible or the ends of the screen image may be cut off. Normally select “WIDE16:9”. | ||
| ● In order to let the equipment determine the screen image size, it is recommended | ||
| that you connect the VCR and TV using the component video output connectors | ||
| or [S VIDEO OUT] connector. |
| |
|
| ||
“FRONT AUX | You have to select which terminal — either [VIDEO] (composite) or | ||
“VIDEO” | separate signals) to use as the video input terminal on the front panel. | ||
Make sure to select the correct terminal; otherwise, you may fail in recording (editing) | |||
| |||
| on this VCR. |
|
|
|
| ||
“REAR AUX | You have to select which terminal — either [VIDEO] (composite) or [S VIDEO] (Y/C | ||
“VIDEO” | separate signals) to use as the video input terminal | ||
Make sure to select the correct terminal; otherwise, you may fail in recording (editing) | |||
| |||
| on this VCR. |
|
|
|
| ||
“REAR AUX | You have to select which terminal — either [VIDEO] (composite) or [S VIDEO] (Y/C | ||
“VIDEO” | separate signals) to use as the video input terminal | ||
Make sure to select the correct terminal; otherwise, you may fail in recording (editing) | |||
| |||
| on this VCR. |
|
|
|
|
|
|