JVC SR-VD400E manual To use a Master Edit Control-equipped JVC Ntsc camcorder

EN 21

To use a Master Edit Control-equipped JVC NTSC camcorder

If you are using a JVC NTSC camcorder equipped with the Master Edit Control, you can control the VCR from the camcorder.

1Access the “ADDITIONAL” screen ( page 39), then set “AV COMPU-LINK” to “OFF” after performing step 6 on page 20.

●The [REMOTE PAUSE/AV COMPULINK] connector works as a Remote Pause connector when “AV COMPU-LINK” is set to “OFF”.

●For details, refer to the camcorder’s instruction

manual.

2Engage the VCR’s recording pause mode.

Various connections for editing tapes

The following three methods can be used for editing tapes.

●VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to S-VHS editing (S-VIDEO connection):

Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.

Compatibility Of Cassettes And Recording Mode

Cassette		Recording Mode
	D-VHS	S-VHS	VHS
D-VHS	Yes	Yes	Yes
S-VHS	No	Yes	Yes
VHS	No	Yes*	Yes

*To record on the VHS cassette with S-VHS quality, use the S-VHS ET function ( page 41).

NOTES:

●The D-VHS (MTP), S-VHS, S-VHS ET and VHS mode recordings are possible with this VCR.

●To record in the D-VHS mode, use a D-VHS cassette.

●To record in the S-VHS/VHS mode, you can use a D-VHS, S-VHS or VHS cassette.

To record in S-VHS mode on D-VHS tapes:

Press [D-VHS] to turn off the [D-VHS] indicator. Then, set “S- VHS MODE” to “ON” ( page 40).

To record in VHS mode on D-VHS tapes:

Press [D-VHS] to turn off the [D-VHS] indicator. Then, set “S- VHS MODE” to “OFF” ( page 40).

Other useful functions for recording

You can also use the following functions for recording.

●“V. Calibration” (S-VHS/VHS only) ( page 36)

When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures.

●S-VHS Recording Mode ( page 40)

This VCR allows you to record on a D-VHS and S-VHS tape with VHS picture quality.

●S-VHS ET ( page 41)

This function allows you to record on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back on a VCR equipped with the S-VHS ET function.

NOTE:

When the channel is changed on the VCR;

●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab