![](/images/new-backgrounds/1230685/23068581x1.webp)
–
EN 41
* The default setting is bold in the table below.
“ON” | using this function can be played back on a VCR equipped with the |
“OFF” | VHS indicator lights up on the front display panel when |
NOTES:
●Before recording, make sure that ”V. CALIBRATION” is set to “ON” ( page 36).
●You cannot activate the
–while recording is in progress.
–while
–while Video Calibration ( page 36) is in progress.
●
●To keep the highest quality recording and playback pictures over a long period of time,
●Use of high grade tapes are recommended for
On some tapes, picture quality will not improve even if the
●You can play back
●While playing back a tape recorded with this function on some tapes, noise may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)
●During special effect playback ( page 13), noise may appear. If special effect playback is performed frequently on a tape recorded with this function, the tape may be damaged and picture may be deteriorated.
“DISPLAY” When this function is set to “OFF”, only “:” appears on the front display panel.
“ON”
“OFF”NOTE:
Even if you set “DISPLAY” to “OFF”, each item appears on the front display panel in the following cases;
●when you press [REC ( ¶ )] twice for the ITR ( page 22).
●when you set the remote control code ( page 46).
●when you press [DISPLAY], the current status appears for a few seconds.