Wiring Example | Haier AB212XCEAA specification

Accessory Pad

Installation Procedure

7. WIRING

All supplied parts. materials and wiring operation must in appliance with local code and regulations.

Use copper wire only.

When make wiring, please refer to wiring diagram also. All wiring work must be done by qualified electricians.

A circuit breaker must be installed, which can cut power supply to all system.

See Installation Manual of outdoor unit for specifications of wires, circuit breaker, switches and wiring etc. Connecting of unit

Remove cover of switch box (1) , drag wires into rubber tube A, then, after proper wiring with other wires, tighten clamp A. Connect wires of correct pole to the terminal block inside.

Wind seal 12 around wires. (Be sure to do that, or, dew may occur). Upon connecting, replace control box cover (1) and (2).

Terminal block

Grounding lead Rubber tube A

Cover of control box(1)

Cover of control box(2)

*Don't fail to seal it, or water may come in.

Rubber tube Note: Have it sealed, leaving no space.

Seal pad (small size 12 ) (Wind around wire)

In Out

Attach seal pad Field wiring

<<WARNING>>

Obscrve the following when connecting power supply terminal block:

Don't connect wires of different specifications to the same terminal block.

(Loose wire may cause overheating of circuit)

Connect wires of same specifications as shown in right Fig.

Connect wires of the	Don't connect wires of	Don't connect wires
same specifications	the same specifications	of the different
at two sides.	at one side.	specifications.

8. WIRING EXAMPLE
As for outdoor unit circuit, please see Installation Manual of outdoor unit.
Note: All electric wires have their own poles, poles must match that on terminal block.
99. INSTALLATION OF ORNAMENT PANEL	Bar	Fig. 1
Cautions for the installation	Bar

Be sure to show customers Operation Manual and guide them how to operate unit correctly. Before installation. read also the Installation Manual of indoor unit. With this ornament , 2 or 3 air flow direction is not available.

Suitable height is 3 m.

Pad

1. Prepare ornament panel Handling of ornament panel

Ornament panel shall not be placed face down or against wall, neither on an uneven object.

Don' t bend carelessly the swing flap, or, problem may occur.

(1)Remove air inlet grill from ornament panel *

1Push in the bar on inlet grill and lift it up. (Refer to Fig. 1)

2Lift it up for about 45 degree and remove it from ornament. Tear off adhesive tape fixing air filter on the back of the air inlet grill. (Refer to Fig. 2)

(2)Remove cover plate at corner

Tear off the adhesive tape, and slide it off. (Refer to Fig. 3)

45	Adbesive tape
45
	Fig. 2

Slide

Fig. 3

AB212XCEAA specifications

The Haier AB212XCEAA is a modern refrigerator that exemplifies innovation and efficiency in kitchen appliances. Designed with the needs of contemporary households in mind, this model combines advanced technology with user-friendly features, making it a popular choice among consumers.

One of the standout features of the Haier AB212XCEAA is its large storage capacity. With a total volume that can accommodate all your groceries and perishables, it allows users to store a variety of items without the hassle of overcrowding. The flexible shelving and adjustable door bins enhance organization, enabling users to maximize space with ease.

Energy efficiency is another significant characteristic of the Haier AB212XCEAA. This refrigerator is designed to operate with minimal energy consumption, contributing to lower utility bills while being environmentally friendly. The energy-saving features are complemented by an advanced cooling system that ensures consistent temperatures throughout, preserving the freshness of food for longer periods.

The Haier AB212XCEAA also incorporates a No Frost technology. This feature eliminates the need for manual defrosting by preventing the build-up of ice within the freezer compartment. It not only minimizes maintenance but also ensures optimal airflow, enhancing the preservation of frozen items.

Interior lighting is thoughtfully designed in this model, featuring LED lights that provide clear visibility without generating excess heat. This ensures that users can easily locate their items, even in low light.

Another notable advantage is the inclusion of antibacterial technology in the refrigerator’s design. This feature helps to reduce the potential for bacterial growth, keeping food safe and extending its shelf life.

The Haier AB212XCEAA is equipped with a silent operation technology, ensuring that it runs quietly in the background — a significant advantage for households where noise can be an issue.

In summary, the Haier AB212XCEAA represents a perfect blend of style, efficiency, and cutting-edge technology. Its spacious interior, energy-saving features, No Frost technology, and quiet operation make it a top choice for modern kitchens, ensuring that your food storage needs are met with optimal performance and convenience.