Haier AB212XCEAA Installation of Water Drainage Pipe, Pipe Tighten Amm Flare shape Size Torque

Page 20
Large size seal pad 10
(accessory)
4mm below below500
Table 1

Installation Procedure

5. REFRIGERANT PIPING (As for outdoor piping, please refer to installation Manual of outdoor unit.)

Outdoor is precharged with refrigerant.

Be sure to see the Fig.1, when connecting and removing piping from unit.

For the size of the flare nut, please refer to Table 1.

Apply refrigerant oil at both inside and outsid of lflare nut. Tighten it band tight 3-4 turns then tighten it.

Use torque specified in Table 1. (Too much force may damage flare nut, causing gas leakage).

Check piping joints for gas leakage. Insulate piping as shown in Fig. below. Cover joint of gas piping and insulator 7 with seal.

Apple refrigerant oil

Torque spanner

spanner

Piping joing

Flare nut

Medium size seal pad 11 (accessory)

(Cover the piping joint with seal pad.)

Clamp 3

Insulator (accessory) 8 (For liquid pipe)

Insulator (accessory) 7 Gas pipe (For gas pipe)

Liquid pipe

Pipe

Tighten

A(mm)

 

Flare shape

size

torque

 

 

 

 

 

6.35

1420~1720N.cm

8.3~8.7

 

 

 

 

(144~176kgf.cm)

 

 

 

9.52

3270~3990N.cm

12.0~12.4

 

 

 

(333~407kgf.cm)

 

2

R0.4 ~ 0.8

 

4950~6030N.cm

 

 

12.7

15.4~15.8

0.5

45

 

 

(504~616kgf.cm)

 

90

 

A

 

6180~7540N.cm

18.6~19.0

 

 

 

 

 

15.88 (630~770kgf.cm)

 

 

 

19.05

9720~11860N.cm

22.9~23.3

 

 

 

(990~1210kgf.cm)

 

 

 

6. INSTALLATION OF WATER DRAINAGE PIPE

(1) Install water drainage pipe

Pipe dia, shall be equal or larger than that of unit piping.(pipe of polyethylent; size: 25mm; O.D:32mm)

Drain pipe should be short, with a downward slope at least 1/100 to prevent air bag from happening.

If downward slope can't be made, take other measures to lift it up.

Keep a distance of 1-1.5m between suspending brackets, to make water hose straight.

1-1.5m

Slope over 1/100

Use the self-provided stiff pipe and clamp 1 with unit. Insert water pipe into water plug until it reaches the white tape. Tighten the clip until head of the screw is less than 4mm from hose.

Wind the drain hose to the clip using seal pad 9 . Insulate drain hose in the room.

Tape (White)

Clamp

Clamp (accessory)

Self-provided stiff pipe

<Cautions for the drain water lifting pipe>

Installation height shall be less than 280mm.

There should be a right angle with unit, 300mm from unit.

Drain hose (accessory)

(Note)

300mm below 1~1.5m

Suspending bracket

 

280220below

500below

drain water lifting pipe

 

Clamp (accessory)

Self-provided stiff pipe

(accessory) below75

The slope of water drain hose (1) shall be within 75mm, don't apply too much force on it. If several water hoses join together, do as per following proceedures.

Over 100

Connect water hoses with a T joint.

Specifieations of the water hoses shall meet the requirements for the unit running.

18

Image 20
Contents Operation & Installation Manual Contents Disposal of the old air conditioner Machine is adaptive in following situation Safety cautions Dont dismantle the outlet of the outdoor unit Introduction to Spare Parts Maintenance Install air filterClean Open inlet grillTake off air-filter Take of inlet grill Clean Install inlet grillInstall swing plate Close inlet grillSeasonal Reserve Post-season Care Trouble Shooting Followings are not malfuncitionOFF When Trouble Happens Insufficient cooling or heatingCustomer Need-to-know Customer Need-to-knowInstallation Procedure WiringLocation Operating noiseMeanings of Warning and Cautions Dont discard any accessories until comp Before InstallationSelection of Installation Place Preparation for the Installation Installation exampleInstallation of Indoor Unit After installation on the ceilingCase of new ceiling Case of ceiling already existsInstallation of Water Drainage Pipe Pipe Tighten Amm Flare shape Size TorqueAfter wiring When wiring is not completeInstallation of Ornament Panel WiringWiring Example Mounting on high ceiling Installation of inlet grill and cover plate Ring terminal connection method Wire connection for built-in indoor unit Failure code Remote receiver can indicate the failure codeHaier Group

AB212XCEAA specifications

The Haier AB212XCEAA is a modern refrigerator that exemplifies innovation and efficiency in kitchen appliances. Designed with the needs of contemporary households in mind, this model combines advanced technology with user-friendly features, making it a popular choice among consumers.

One of the standout features of the Haier AB212XCEAA is its large storage capacity. With a total volume that can accommodate all your groceries and perishables, it allows users to store a variety of items without the hassle of overcrowding. The flexible shelving and adjustable door bins enhance organization, enabling users to maximize space with ease.

Energy efficiency is another significant characteristic of the Haier AB212XCEAA. This refrigerator is designed to operate with minimal energy consumption, contributing to lower utility bills while being environmentally friendly. The energy-saving features are complemented by an advanced cooling system that ensures consistent temperatures throughout, preserving the freshness of food for longer periods.

The Haier AB212XCEAA also incorporates a No Frost technology. This feature eliminates the need for manual defrosting by preventing the build-up of ice within the freezer compartment. It not only minimizes maintenance but also ensures optimal airflow, enhancing the preservation of frozen items.

Interior lighting is thoughtfully designed in this model, featuring LED lights that provide clear visibility without generating excess heat. This ensures that users can easily locate their items, even in low light.

Another notable advantage is the inclusion of antibacterial technology in the refrigerator’s design. This feature helps to reduce the potential for bacterial growth, keeping food safe and extending its shelf life.

The Haier AB212XCEAA is equipped with a silent operation technology, ensuring that it runs quietly in the background — a significant advantage for households where noise can be an issue.

In summary, the Haier AB212XCEAA represents a perfect blend of style, efficiency, and cutting-edge technology. Its spacious interior, energy-saving features, No Frost technology, and quiet operation make it a top choice for modern kitchens, ensuring that your food storage needs are met with optimal performance and convenience.