Display
| 1 |
| 6 |
| 2 |
| 7 |
| 3 |
| 8 |
|
| 9 | |
|
|
| 10 |
| 4 |
| 11 |
| 5 |
| 12 |
1. | Dual Watch Indicator | 7. | Battery Level Meter |
2. | Transmit/Receive | 8. | |
| Indicator | 9. | Up timer Indicator |
3. | Channel Indicator | 10.APO (Auto Power Off) | |
4. | Volume Level Indicator |
| Indicator |
5. | VOX/Room Monitor | 11.Keypad Lock Indicator | |
| Indicator | 12.Call Tone Indicator | |
6. | Scan Indicator |
|
|
Installing the Battery
1.Make sure your radio is turned OFF.
2.To remove the battery compartment door, press the tab at the bottom of the compartment door.
3.Install the NiMH batteries into the battery compartment.
4.Replace the battery compartment door.
Battery Level and Low Battery Alert
Indicates that the battery is fully charged.
Blinks when battery is low; charge the radio or replace batteries immediately.
Charging the Radio
Using the Charging Cradle :
1.Make sure your radio is turned OFF.
2.Connect the AC adapter to the DC IN 9V of the charging cradle.
3.Place the charging cradle on a stable surface.
4.Place the radio in the charging cradle with the keypad facing forward.
5.LED indicator will illuminate and remain illuminated as long as the radio is in the charger.
Note: Charge the battery pack for 16 hours.
Using the Battery Support Bracket :
1.Remove the rechargeable NiMH battery pack from the radio.
2.Place the battery support bracket into the charging cradle.
3.Install the NiMH battery pack into the charging cradle. Ensure that the charging contacts are correctly aligned.
4.LED indicator will illuminate and remain illuminated as long as the radio is in the charger.
Note: Charge the battery pack for 16 hours.
English
3
