Welcome
Thank you for purchasing the Altec Lansing inMotion Classic speaker system. Designed specifically to work with your iPod, this system provides
Please carefully read this User Guide for instructions on setting up and using your inMotion Classic speaker system.
Prior to installing or operating the Altec Lansing inMotion Classic speaker system, refer to the important product safety information.
Getting Assistance
The answers to most setup and performance questions can be found in the Troubleshooting section of this guide. You can also consult the frequently asked questions (FAQ) in the customer support section of our Web site at www.alteclansing.com.
If you live in North America and still can’t find the information you need, please call our customer service team for assistance before returning this product to your retailer under their return policy.
Tel:
Email: csupport@alteclansing.com
If you live outside of North America, please visit our Web site at www.alteclansing.com and select your region to locate your country’s distributor.
For the most
Registering Your Product
Visit www.alteclansing.com to register your product online, so we can provide you with the best possible service and technical support.
Placing the inMotion Classic
Open the inMotion Classic by pressing the button on the front of the speaker system. Position the inMotion Classic on a level surface, preferably close to you (within three feet).
Assembling the inMotion Classic
Dock your iPod by sliding your iPod on top of the iM600 docking station. If necessary, first install the docking adapter that came with your iPod. While the docking adapter is not required for proper functioning of your iPod and iM600, it will provide a better fit.
Note: Alternate audio sources — such as
Power
Use one of the following two options to power your inMotion Classic:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion Classic. After this connection is made, insert the power supply into a wall outlet.
DC (Battery) Power
The inMotion Classic features a
Charging time | up to 3 hours |
Continuous Playing Time | up to 5 hours |
Charging the rechargeable battery:
The battery should be fully charged before initial use.
To recharge the battery, insert the barrel connector from the power supply into the DC connector on the rear of the inMotion Classic. After this connection is made, insert the power supply into a
wall outlet. The indicator light turns on. When the battery is fully recharged, the indicator light turns off.
When the battery icon on the LCD screen displays a single segment the battery should be recharged. When the icon starts flashing, the iM600 is about to shut down.
Warning: During the recharging process it is typical for the battery to become warm. To be safe, keep flammable materials away from the inMotion Classic.
Note: To conserve battery power, reduce the inMotion Classic volume level.
Disconnecting the rechargeable battery:
1.Unplug the inMotion Classic from the wall outlet.
2.Open the inMotion Classic by pressing the button on the front of the speaker system.
3.Remove the rechargeable battery compartment cover by removing the 2 screws.
4.Unplug the battery and remove it.
Start Playing
1.Turn on your iPod.
2.Turn on the inMotion Classic by pushing the 
button. The indicator light turns on.
3.Press the SOURCE button until “iPod” is displayed on the LCD screen.
Note: To avoid hearing a popping sound when you turn on your inMotion Classic, always turn on your audio source first.
Power Off
Turn off the inMotion Classic by pushing the 
button. The indicator light shuts off.
Auto Shut-down
During 
button to turn the inMotion Classic back on.
NOTE: The Auto 
button is pushed and the indicator light shuts off.
FM Radio
The inMotion Classic features a
Activate the FM radio mode:
Press the SOURCE button until “FM” is displayed on the LCD screen.
2