Graco 308116T Troubleshooting, Relieve the pressure, Problem Cause Solution

Page 11

Troubleshooting

WARNING

To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8.

1.Relieve the pressure.

2.Check all possible problems and solutions before disassembling pump.

Problem

Cause

Solution

 

 

 

Pump fails to operate.

Restricted line or inadequate air

Clear; increase air supply.

 

supply.

 

 

 

 

 

Insufficient air pressure; closed or

Open; clean.

 

clogged air valves, etc.

 

 

 

 

 

Exhausted fluid supply.

Refill; purge all air from pump and

 

 

fluid lines.

 

 

 

 

Damaged air valving mechanism;

Service air motor (see 306982 or

 

stalling.

307043).

 

 

 

 

Dried fluid seizure of displacement

Clean, check, or replace throat

 

rod (13).

packings (5, 24); always stop pump

 

 

at bottom of stroke and keep wet-

 

 

cup filled with compatible solvent.

 

 

 

Pump operates but output is low on

Restricted line or inadequate air

Clear; increase air supply.

both strokes.

supply.

 

 

 

 

 

Insufficient air pressure; closed or

Open; clean.

 

clogged air valves, etc.

 

 

 

 

 

Exhausted fluid supply.

Refill; purge all air from pump and

 

 

fluid lines.

 

 

 

 

Clogged fluid line, valves, etc.

Clear.*

 

 

 

 

Packing nut (2) too tight.

Loosen (see page 9).

 

 

 

 

Loose packing nut (2) or worn throat

Tighten packing nut (see page 9);

 

packings (5, 24).

replace throat packings.

 

 

 

Pump operates but output is low on

Held open or worn intake valve.

Clear; service.

downstroke.

 

 

 

 

 

Pump operates but output is low on

Held open or worn fluid piston valve

Clear; service.

upstroke.

or packings (20, 23).

 

 

 

 

Erratic or accelerated operation.

Exhausted fluid supply.

Refill; purge all air from pump and

 

 

fluid lines.

 

 

 

 

Held open or worn intake valve.

Clear; service.

 

 

 

 

Held open or worn fluid piston valve

Clear; service.

 

or packings (20, 23).

 

 

 

 

*To determine if the fluid hose or gun is obstructed, follow the Pressure Relief Procedure on page 8. Discon- nect the fluid hose and place a container at the pump fluid outlet to catch any fluid. Turn on the air just enough to start the pump (about 20--40 psi [0.1--0.3 MPa, 1.4--2.8 bar]). If the pump starts when the air is turned on, the obstruction is in the fluid hose or gun.

308116 11

Image 11
Contents Ratio Monarkr Pump Instructions--Parts ListImportant Safety Instructions Ratio Presidentr PumpSymbols Table of ContentsSurgical treatment Skin Injection HazardFire and Explosion Hazard KEY Typical InstallationMounting the Pump InstallationGeneral Information Prepare the Operator GroundingAir and Fluid Hoses System AccessoriesMounting Accessories Air Line AccessoriesFlush the Pump Before First Use Operation/MaintenancePressure Relief Procedure Shutdown and Care of the Pump Starting and Adjusting the PumpAir Motor Plate Relieve the pressure TroubleshootingProblem Cause Solution Follow the Pressure Relief Procedure on ServiceDisconnecting the Displacement Pump Reconnecting the Displacement PumpReassembly Displacement Pump ServiceDisassembly Detail B Piston Packings Detail a Throat PackingsPart Description Qty PartsModel 224342, Series a Model 261630, Series a Model 224343, Series a shownModel 247147, Series a Model 902147, Series a shownModel 254999, Series a Model 224341, Series a shownDescription Qty Model 224341, Series aOptional Ptfe Packing Conversion KitModel 15G976, Series a Parts Category Data Technical DataPresident Monark Pump Model Dimensions Mounting HoleLayout Model 224342 Shown308116 Graco Information Graco Standard Warranty

308116T specifications

The Graco 308116T is an advanced airless paint sprayer designed for both professional and DIY users, ideal for tackling a variety of painting tasks with precision and efficiency. This model exemplifies Graco’s commitment to innovation and user-friendliness, providing exceptional performance for projects of all sizes.

One of the standout features of the Graco 308116T is its TrueAirless Technology, which allows users to spray directly from the paint can without the need for thinning. This feature not only saves time but also ensures a smooth and even application of paint, allowing for a professional finish. With a maximum pressure of 3,000 PSI, this sprayer is capable of handling a wide range of coatings, including heavier materials, making it suitable for both residential and commercial applications.

The Graco 308116T also boasts an adjustable spray pattern, enabling users to switch between a wide fan pattern for larger surfaces and a narrower pattern for detailed work. This versatility is enhanced by the innovative RAC IV SwitchTip technology, which allows users to reverse the tip for easy clog clearance, minimizing downtime and frustration during projects.

In terms of portability, the Graco 308116T is equipped with a lightweight yet durable frame, ensuring easy transport and mobility on job sites. The integrated carrying handle adds to its convenience, making it easy to maneuver around different areas as needed.

Another significant characteristic of the Graco 308116T is its high-efficiency airless pump. This advanced pump design delivers consistent pressure and a steady flow of paint, improving productivity and reducing paint waste during application. The unit is also designed for easy clean-up after use, with a simple system that allows for quick flushing of the paint system.

Additionally, durability is a key aspect of the Graco 308116T. Constructed with high-quality materials, it is built to withstand the rigors of frequent use while maintaining performance over time. Its robust design makes it suitable for a wide range of applications, from painting walls and ceilings to tackling outdoor projects.

Overall, the Graco 308116T airless paint sprayer combines advanced technology with user-friendly features, delivering exceptional performance and versatility. Whether you’re a seasoned professional or a DIY enthusiast, this sprayer is an excellent choice for achieving flawless finishes with ease.