Running in the Loudspeakers
As a loudspeaker is basically a mechanical transducer consisting of several different components, the individ- ual elements must be run in during the initial weeks. This will ensure that the sound quality potential of your loudspeakers is fully utilized. You will definitely notice the resulting improvement in sound.
Recommendations:
In the first days and weeks listen only at normal volume.
Avoid very high volume levels during initial phase.
Listen to a wide range of programme material.
Limit range:
The recommended amplifier output is, depending on the model, 20 – 250 Watt. It must be ensured that the volume must only be turned up far enough for the ear to register an overload.
If the loudspeaker chassis become damaged after a long period of overload, this can be detected beyond any doubt by PIEGA service technicians. In these cases, PIEGA is not liable for any warranty claims.
Note:
Excessively loud music can damage your health. Listen to music at an acceptable volume level for the sake of your health.
10 PIEGA User Manual