Unpacking the Loudspeakers
Special care was taken in the packaging of your new PIEGA quality products in order to ensure that your loudspeakers reach your living room safely and undamaged. In order to avoid any damage when unpacking the loudspeakers, follow closely the instructions below without fail.
Procedure:
In order to avoid any damage when unpacking the loudspeakers or during the installation, you should always carry out the work with another person.
Before unpacking, remove any jewelry such as watches, rings, bracelets etc. in order to avoid scratching the aluminum surface.
Open the carton as shown in the figure, remove the metal brackets on the carton carefully and lift out the loudspeakers and protective cushions.
Carefully remove the protective cushions and protec- tive wrapping by carefully pulling it up over the loudspeakers.
Check without fail that the delivery is complete, that the loudspeaker version supplied corresponds to your order, and that the loudspeakers have not been damaged in transit.
If this is the case, follow the instructions on the remaining pages or otherwise contact the dealer where you purchased the loudspeakers.
Warning:
PIEGA loudspeakers have cabinets made from polished aluminum. When unpacking, handle carefully at all times...!
PIEGA User Manual | 5 |