Connecting the Loudspeakers
The terminal for single wiring applications is provided at the back of the loudspeaker. This is used for connect- ing standard loudspeaker cables with banana plugs or with a lead. Ideally, PIEGA loudspeakers should be con- nected with the OPUS 3 or OPUS 1 loudspeaker cable which is available as an accessory.
Pass the wires fully through the opening
Connection:
Ensure that the electronic components are switched off before making the connection.
PIEGA loudspeakers must only be connected to elec- tronic components with the amplifier outputs recom- mended by PIEGA. Observe the specifications of the amplifier manufacturer. Contact your dealer if you are unsure whether the connection is permissible.
The loudspeakers have an impedance of 4 Ohms and
can therefore be connected to any standard amplifier.
Contact your specialist dealer concerning this.
Connect the PIEGA loudspeaker to your amplifier or receiver using suitable cables as shown in the fig- ure. Ideally, use the OPUS 1 or OPUS 3 loudspeaker cable (optional) with banana plugs or standard loud- speaker cables with a lead.
Fully insert the banana plugs up to the stop
Important:
Ensure the poles are connected correctly! A com- pletely diffuse sound with a weak bass will be pro- duced if the plus and minus poles are incorrectly con- nected.
Active variant:
For PIEGA loudspeakers with the Active module op- tion, please contact your retailer.
PIEGA User Manual | 9 |