Graco 312794E important safety instructions Related Manuals, Manual Description

Page 6

Related Manuals

WARNING

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

Always wear impervious gloves when spraying or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

Related Manuals

Manual Description

312792 Merkur Displacement Pump

312796 NXTAir Motor

312797 Merkur Non-Heated Spray Packages

312798

Merkur Electrostatic Spray Packages, Ambient and Heated

313255 Merkur Heated Spray Packages

6

312794E

Image 6
Contents Merkur Pump Assembly Ll 2 GContents Pump Part Number Matrix Wet cup RatioData Monitoring/Exhaust Pump Models Fire and Explosion Hazard Related Manuals Manual DescriptionComponent Identification Component Identification KeyPrepare the Operator Prepare the Site InstallationGeneral Information GroundingAccessories Mount the PumpAir and Fluid Hoses Typical Installation G15 Spray Gun Shown with Supply HoseOperation Pressure Relief ProcedureFlush Before Using Equipment Wet CupPrime and Adjust the Pump Shutdown and Care of the PumpFollow Pressure Relief Procedure, MaintenancePreventive Maintenance Schedule Tighten Threaded ConnectionsTroubleshooting Problem Cause SolutionDisconnect the Displacement Pump RepairReconnect the Displacement Pump Displacement Pump Torque LW025ALW050A-LW150A Motor Torque Disconnect the Air MotorReconnect the Air Motor All Other SizesPump Parts Parts That Vary by Model QtyDescription For displacement pump repair kits, see manual Repair KitsPerformance Charts Model W10xxxModel W15Axx Model W15Bxx Model W15FxxFlow Model W18xxx Model W23xxxModel W24xxx Model W28xxxModel W30Axx Model W30CxxBar Model W36xxx Model W45xxxModel W48xxx Ratio, 75 cc/cyclePump Dimensions Pump Model WeightWall Bracket Mounting Dimensions Technical DataGraco Standard Warranty Graco Information