Graco 3A2578B Warnings, Toxic Fluid Or Fumes Hazard, Burn Hazard, Personal Protective Equipment

Page 5

TOXIC FLUID OR FUMES HAZARD

Warnings

WARNING

TOXIC FLUID OR FUMES HAZARD

Toxic ﬂuids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDSs to know the speciﬁc hazards of the ﬂuids you are using.

•Route exhaust away from work area. If diaphragm ruptures, ﬂuid may be exhausted into the air.

•Store hazardous ﬂuid in approved containers, and dispose of it according to applicable guidelines.

BURN HAZARD

Equipment surfaces and ﬂuid that’s heated can become very hot during operation. To avoid severe burns:

•Do not touch hot ﬂuid or equipment.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the ﬂuid and solvent manufacturer.

3A2578B

5

Image 5

Contents 3A2578B Husky 2200 Air-OperatedDiaphragm PumpOperation 3A2578B ContentsWarnings WarningsFIRE AND EXPLOSION HAZARD PRESSURIZED EQUIPMENT HAZARDWarnings PLASTIC PARTS CLEANING SOLVENT HAZARDEQUIPMENT MISUSE HAZARD THERMAL EXPANSION HAZARDTOXIC FLUID OR FUMES HAZARD WarningsBURN HAZARD PERSONAL PROTECTIVE EQUIPMENTOrdering Information To Order Replacement PartsRelated Manuals To Find Your Nearest Distributor2200P Conﬁguration Number MatrixP01A 2200PGeneral Information InstallationTighten Fasteners Tips to Reduce CavitationAccessories/Components Not Supplied InstallationSystem Components 3A2578BGround The System InstallationAir Lines •Fluid supply container: Follow local codeNOTICE Air Exhaust VentilationInstallation To provide a remote exhaustFluid Outlet Line Fluid Supply LineInstallation 3A2578B3A2578B Flange ConnectionsInstallation Start and Adjust the Pump Pressure Relief ProcedureOperation Flush the Pump Before First UseMaintenance Schedule MaintenanceLubrication Tighten Threaded ConnectionsTorque Instructions Torque InstructionsDo not overtorque Fluid Cover Screws3A2578B NotesNotes End Flange Models, Polypropylene and PVDF DimensionsDimensions PolypropyleneDimensions Center Flange Models, Polypropylene OnlyPolypropylene PolypropyleneBolt-throughDiaphragms Performance ChartsFluid Pressure Air ConsumptionPerformance Charts Overmolded DiaphragmsHow to Read the Charts Fluid PressureTechnical Data Technical DataHusky 2200 Diaphragm Pump Air consumptionWeight Technical DataMaximum pump speed Wetted PartsGraco Standard Husky Pump Warranty Graco Information