Graco 3D150 important safety instructions Equipment Misuse Hazard

Page 3

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

Warning

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

•This equipment is for professional use only.

•Read all instruction manuals, tags, and labels before operating the equipment.

•Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

•Do not alter or modify this equipment. Use only genuine Graco parts and accessories.

•Check equipment daily. Repair or replace worn or damaged parts immediately.

•Do not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 24 for the maximum working pressure of this equipment.

•Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Techni- cal Data section of all equipment manuals. Read the fluid and solvent manufacturer's warnings.

•Do not use hoses to pull equipment.

•Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 82°C (180°F) or below -40°C (-40°F).

•Wear hearing protection when operating this equipment.

•Comply with all applicable local, state, and national fire, electrical, and safety regulations.

PRESSURIZED EQUIPMENT HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury.

•Do not point the gun at anyone or at any parts of the body.

•Do not stop or deflect leaks with your hand, body, glove, or rag.

•Follow the Pressure Relief Procedure on page 10 whenever you are instructed to relieve pressure; stop spraying; clean, check, or repair the equipment; and install or clean the spray nozzle.

•Tighten all fluid connections before operating the equipment.

•Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

•Ground the equipment and the object being sprayed. Refer to Grounding on page 9.

•If there is any static sparking or you feel an electric shock while using this equipment, stop the equipment immediately. Do not use the equipment until you identify and correct the problem.

•Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

•Keep the work area free of debris, including solvent, rags, and gasoline.

•Eliminate all ignition sources such as pilot lights, cigarettes, and static arcs from plastic drop cloths. Do not plug in or unplug power cords or turn lights on or off in the spray area.

311688D

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents II 2 G Triton 3D150 Diaphragm PumpContents Equipment Misuse Hazard Toxic Fluid Hazard Installation General InformationTightening Threaded Fasteners Before First Use Mounting the Pump Mounting the PumpAir Line Fluid Suction LineFluid Outlet Line Key Typical InstallationGround all of this equipment GroundingFlushing the Pump Before First Use Pressure Relief ProcedureStarting and Adjusting the Pump OperationFlushing and Storage MaintenancePreventive Maintenance Schedule LubricationProblem Cause Solution TroubleshootingGeneral Repair Notes Fault IndicationsRepair Prepare the Pump for RepairReplace the Diaphragms DisassemblyReplace the Diaphragms Repair the Air Valve ReassemblyRepair the Air Valve Repair the Shaft and Bearings Repair the Shaft Replace the Ball Check Valves Replace the Ball Check Valves Part No , Series B Part No , Series B PartsDescription Part No BSPP, Series B Part No NPT, Series BCategory Data Technical DataPerformance Chart Dimensions DimensionsDimensions 311688D Graco Standard Warranty Graco InformationToll Free

3D150 specifications

The Graco 3D150 is a prominent name in the airless paint sprayer market, specifically engineered for both professionals and serious DIY enthusiasts. This machine is lauded for its reliability, efficiency, and exceptional quality, making it a top choice for a myriad of painting projects, from small residential jobs to larger commercial applications.

One of the standout features of the Graco 3D150 is its robust 1.5 horsepower motor. This powerful engine allows for an impressive flow rate, enabling users to cover large areas quickly and efficiently. This feature is particularly beneficial for those working on extensive projects where time is of the essence, helping to reduce labor costs and overall project durations.

The Graco 3D150 also utilizes advanced ProConnect technology, which enables users to quickly and easily replace the pump without the need for additional tools. This system not only minimizes downtime when servicing the sprayer but also enhances its overall durability and lifespan. Users can enjoy hassle-free maintenance, making it an ideal choice for contractors who rely on their equipment day in and day out.

Additionally, the sprayer features an adjustable pressure control system, allowing users to customize the output according to their specific needs. This flexibility ensures that paint is applied evenly and smoothly, regardless of the surface or coating type. The Graco 3D150 supports a variety of spray tips, accommodating different materials and project requirements, whether it's thick latex paints, stains, or sealers.

Another key characteristic of the Graco 3D150 is its lightweight design and compact structure. This makes the sprayer easy to transport and maneuver, especially in tight spots or multi-story projects. The well-designed handle and wheels enhance portability, ensuring that users can work efficiently without the burden of heavy equipment.

The Graco 3D150 incorporates a high-efficiency airless spray mechanism that minimizes overspray while maximizing coverage. This technology not only saves material costs but also ensures a cleaner working environment. Overall, with its combination of performance, user-friendliness, and innovative features, the Graco 3D150 stands out as an excellent investment for anyone serious about achieving professional-quality results in their painting projects.
Top Page Image Contents