Graco 3D150 important safety instructions Repair the Shaft and Bearings

Page 18

Repair the Shaft and Bearings

Parts marked with a (♦) are included in Shaft repair kit 233841. For the best results, use all parts in the repair kit.

Parts marked with a (❖) are included in Bearing repair kit 15J647.

Disassembly

1.Remove the diaphragms. See page 13.

2.Disassemble the air valve. See page 16.

3.Remove the housing (54).

•Sleeve clamp (6) is visible inside the air valve cavity. Spread the sleeve clamp (6) with pliers DIN 5254A, nominal size 19, and at the same time, slide the shaft assembly (7) out from the end where housing (54) was removed.

The valve carriage (5) will remain free inside the diaphragm housing.

Repair

4. Remove clip (42) and bearing (3).

Reassembly

1.Replace o-ring (2) in bearing, lubricate internal o-rings.

2.Install new bearing (3) and clip (42) inside housing (54).

3.Insert shaft assembly (7) into diaphragm housing (1) through the valve carriage, spreading the sleeve clamp to allow full insertion. Be careful to release sleeve clamp (6) in the correct location along the shaft to engage it in all three grooves.

4.Reinstall the housing (54).

5.Replace o-rings on the carriage, air valve plate, and plugs and reinstall the air valve section. (See page 16.)

6.Replace the diaphragms (page 13).

7.Replace the ball check seals (29) (page 20) and reinstall the fluid covers.

18

311688D

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Triton 3D150 Diaphragm Pump II 2 GContents Equipment Misuse Hazard Toxic Fluid Hazard Installation General InformationTightening Threaded Fasteners Before First Use Mounting the Pump Mounting the PumpAir Line Fluid Suction LineFluid Outlet Line Typical Installation KeyGrounding Ground all of this equipmentOperation Pressure Relief ProcedureStarting and Adjusting the Pump Flushing the Pump Before First UseLubrication MaintenancePreventive Maintenance Schedule Flushing and StorageTroubleshooting Problem Cause SolutionPrepare the Pump for Repair Fault IndicationsRepair General Repair NotesDisassembly Replace the DiaphragmsReplace the Diaphragms Reassembly Repair the Air ValveRepair the Air Valve Repair the Shaft and Bearings Repair the Shaft Replace the Ball Check Valves Replace the Ball Check Valves Parts Part No , Series B Part No , Series BPart No BSPP, Series B Part No NPT, Series B DescriptionTechnical Data Category DataPerformance Chart Dimensions DimensionsDimensions 311688D Graco Standard Warranty Graco InformationToll Free

3D150 specifications

The Graco 3D150 is a prominent name in the airless paint sprayer market, specifically engineered for both professionals and serious DIY enthusiasts. This machine is lauded for its reliability, efficiency, and exceptional quality, making it a top choice for a myriad of painting projects, from small residential jobs to larger commercial applications.

One of the standout features of the Graco 3D150 is its robust 1.5 horsepower motor. This powerful engine allows for an impressive flow rate, enabling users to cover large areas quickly and efficiently. This feature is particularly beneficial for those working on extensive projects where time is of the essence, helping to reduce labor costs and overall project durations.

The Graco 3D150 also utilizes advanced ProConnect technology, which enables users to quickly and easily replace the pump without the need for additional tools. This system not only minimizes downtime when servicing the sprayer but also enhances its overall durability and lifespan. Users can enjoy hassle-free maintenance, making it an ideal choice for contractors who rely on their equipment day in and day out.

Additionally, the sprayer features an adjustable pressure control system, allowing users to customize the output according to their specific needs. This flexibility ensures that paint is applied evenly and smoothly, regardless of the surface or coating type. The Graco 3D150 supports a variety of spray tips, accommodating different materials and project requirements, whether it's thick latex paints, stains, or sealers.

Another key characteristic of the Graco 3D150 is its lightweight design and compact structure. This makes the sprayer easy to transport and maneuver, especially in tight spots or multi-story projects. The well-designed handle and wheels enhance portability, ensuring that users can work efficiently without the burden of heavy equipment.

The Graco 3D150 incorporates a high-efficiency airless spray mechanism that minimizes overspray while maximizing coverage. This technology not only saves material costs but also ensures a cleaner working environment. Overall, with its combination of performance, user-friendliness, and innovative features, the Graco 3D150 stands out as an excellent investment for anyone serious about achieving professional-quality results in their painting projects.
Top Page Image Contents