Graco 3D150 important safety instructions Mounting the Pump

Page 6

Mounting the Pump

•For ease of operation and service, mount the pump so the air inlet, fluid inlet, and fluid outlet ports are easily accessible.

•Mount the pump in a well-ventilated area with suffi- cient clearance on all sides for operator access and servicing.

•The pump must be mounted horizontally as shown in FIG. 1. Be sure that the pump is level in all direc- tions and that the cylinder housing (54) is positioned on the bottom. See FIG. 1.

•The pump can be floor mounted or mounted on a wall using mounting kit 246495.

•Be sure the mounting can support the weight of the pump, hoses, and accessories as well as the stress caused during operation. The pump has two mount- ing holes for 0.31 in. (8 mm) screws. See the Dimension drawing on page 26.

Wall mount using kit 246495:

1.Use the bracket (15C022) as a template to drill 2 0.38 (9.6 mm) diameter holes in the wall.

2.Loosely attach bracket (15C022) to the wall with anchors and screws (8 mm) long enough to prevent the bracket from vibrating during operation.

3.Remove bracket from the wall and fasten it to the pump using the 4 screws (116899) and 1 lock washer (100028) included in the kit.

4.The lock washer must be used in the unpainted hole to ensure proper grounding of the bracket.

Installation

5.Mount the bracket with the pump attached to the wall and tighten.

Hexagonal screw (2 required)

 

Compressed air

 

connection

 

Fluid

 

Inlet

Fluid

Cylinder

Outlet

Housing (54)

 

 

TI2133A 2

Floor Mount

Hexagonal

 

screw

 

(2 required)

Wall

Mount

Bracket

TI2469A

Wall Mount

FIG. 1. Mounting the Pump

6

311688D

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Triton 3D150 Diaphragm Pump II 2 GContents Equipment Misuse Hazard Toxic Fluid Hazard Installation General InformationTightening Threaded Fasteners Before First Use Mounting the Pump Mounting the PumpAir Line Fluid Suction LineFluid Outlet Line Typical Installation KeyGrounding Ground all of this equipmentOperation Pressure Relief ProcedureStarting and Adjusting the Pump Flushing the Pump Before First UseLubrication MaintenancePreventive Maintenance Schedule Flushing and StorageTroubleshooting Problem Cause SolutionPrepare the Pump for Repair Fault IndicationsRepair General Repair NotesDisassembly Replace the DiaphragmsReplace the Diaphragms Reassembly Repair the Air ValveRepair the Air Valve Repair the Shaft and Bearings Repair the Shaft Replace the Ball Check Valves Replace the Ball Check Valves Parts Part No , Series B Part No , Series BPart No BSPP, Series B Part No NPT, Series B DescriptionTechnical Data Category DataPerformance Chart Dimensions DimensionsDimensions 311688D Graco Standard Warranty Graco InformationToll Free

3D150 specifications

The Graco 3D150 is a prominent name in the airless paint sprayer market, specifically engineered for both professionals and serious DIY enthusiasts. This machine is lauded for its reliability, efficiency, and exceptional quality, making it a top choice for a myriad of painting projects, from small residential jobs to larger commercial applications.

One of the standout features of the Graco 3D150 is its robust 1.5 horsepower motor. This powerful engine allows for an impressive flow rate, enabling users to cover large areas quickly and efficiently. This feature is particularly beneficial for those working on extensive projects where time is of the essence, helping to reduce labor costs and overall project durations.

The Graco 3D150 also utilizes advanced ProConnect technology, which enables users to quickly and easily replace the pump without the need for additional tools. This system not only minimizes downtime when servicing the sprayer but also enhances its overall durability and lifespan. Users can enjoy hassle-free maintenance, making it an ideal choice for contractors who rely on their equipment day in and day out.

Additionally, the sprayer features an adjustable pressure control system, allowing users to customize the output according to their specific needs. This flexibility ensures that paint is applied evenly and smoothly, regardless of the surface or coating type. The Graco 3D150 supports a variety of spray tips, accommodating different materials and project requirements, whether it's thick latex paints, stains, or sealers.

Another key characteristic of the Graco 3D150 is its lightweight design and compact structure. This makes the sprayer easy to transport and maneuver, especially in tight spots or multi-story projects. The well-designed handle and wheels enhance portability, ensuring that users can work efficiently without the burden of heavy equipment.

The Graco 3D150 incorporates a high-efficiency airless spray mechanism that minimizes overspray while maximizing coverage. This technology not only saves material costs but also ensures a cleaner working environment. Overall, with its combination of performance, user-friendliness, and innovative features, the Graco 3D150 stands out as an excellent investment for anyone serious about achieving professional-quality results in their painting projects.
Top Page Image Contents