Using Finishing Tools
Using Finishing Tools
3. Use flow control knob (C) to set material flow rate. Turn flow control knob clockwise to increase material flow.
Corner Finishing
ti15681a
1.Attach corner finisher inlet swivel to inline valve controller (JJ) valve using
ti15666a
QC
ti8794a
C
NOTE: Fine flow rate adjustments can be made using “+” and
+
-
ti15675a
2.Press pin on top of corner finisher head to install onto handle.
4.Pull trigger and work from top to bottom of vertical angles and from one end to other on ceiling angles.
5.Use drywall knife to detail corner and ceiling angle intersections.
ti15665a
3A0245B | 11 |