Graco 258907, 262300 manual Electric Shock Hazard, Skin Injection Hazard, Fire and Explosion Hazard

Page 2

Warning

Warning

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point sym- bol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Use only grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on power and extension cords.

Do not expose to rain. Store indoors.

SKIN INJECTION HAZARD

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Engage trigger lock when not dispensing.

Do not point dispensing device at anyone or at any part of the body.

Do not put your hand over the fluid outlet.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Follow the Pressure Relief Procedure when you stop dispensing and before cleaning, checking, or servicing equipment.

Tighten all fluid connections before operating the equipment.

Check hoses and couplings daily. Replace worn or damaged parts immediately.

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Do not dispense flammable or combustible materials near an open flame or sources of ignition such as cigarettes, motors, and electrical equipment.

• Material or solvent flowing through the equipment is able to result in static electricity. Static electricity creates a risk of fire or explosion in the presence of material or solvent fumes. All parts of the system, including the pump, hose assembly, dispenser, and objects in and around the work area shall be properly grounded to protect against static discharge and sparks. Use Graco conductive or grounded high-pressure airless material hoses.

• Verify that all containers and collection systems are grounded to prevent static discharge.

Connect to a grounded outlet and use grounded extensions cords. Do not use a 3-to-2 adapter.

Do not use a material or a solvent containing halogenated hydrocarbons.

Keep work area well-ventilated. Keep a good supply of fresh air moving through the area. Keep pump assembly in a well ventilated area.

Do not smoke in the work area.

Do not operate light switches, engines, or similar spark producing products in the work area.

Keep area clean and free of material or solvent containers, rags, and other flammable materials.

Know the contents of the materials and solvents being dispensed. Read all Material Safety Data Sheets (MSDS) and container labels provided with the materials and solvents. Follow the material and solvents manufacturer’s safety instructions.

Fire extinguisher equipment shall be present and working.

Drywall feed pump generates sparks. When flammable liquid is used in or near the drywall feed pump or for flushing or cleaning, keep unit at least 20 feet (6 m) away from explosive vapors.

2

3A0245B

Image 2
Contents Repair Manual 3A0246 English Pump Manual 3A0912 English Related ManualsRead ALL Warnings and Instructions Fire and Explosion Hazard Electric Shock HazardSkin Injection Hazard Moving Parts Hazard Component Identification Unit Component Identification Hoses and Tools IC Notice IC 4840ACED1 GroundingFCC Notice FCC ID JHICED1 Model Number DFS150 Grounding Instructions North AmericaChange Display Units SetupOperation Main Menu Job GallonsLearn the Controller Perform Pressure Relief Procedure, seeLifetime Gallons Secondary Menu Stored DataPress and hold DTS button to clear error code to zero Prime Pump Using Finishing Tools Corner FinishingFlat Box Finishing Automatic Taping Cleanup StorageProblem Cause Solution TroubleshootingMotor Will Not Operate See flow chart, Pressure Relief Procedure, Low or Fluctuating OutputBasic Electrical Problems , see Electrical ShortRF Problems Perform Pressure Relief Procedure Type of Problem What to Check HOW to CheckDrywall feed pump does not Check transducer or transducer Blinks 5 times repeatedly StepProblem with motor or control Drywall feed pump does not Is motor overheating? Run at all Troubleshooting Procedure Unit Will Not Shut OffUnit Will Not Run YESUnit Will Not Run Steps 100-120 VAC NA Units StepUnit Will Not Run Steps 100-120 VAC UK Unit Will Not Run Steps 220-240 VAC Units Technical Data Unit Technical Data Pump3A0245B Graco Standard Warranty Graco InformationGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN
Related manuals
Manual 40 pages 59.66 Kb

258907, 262288, 262300, 258906, 257100 specifications

Graco, a well-known name in the field of paint sprayers and equipment, offers a range of products designed for both professionals and DIY enthusiasts. Among their popular models are the Graco 257100, 258906, 262300, 262288, and 258907. These units are engineered to deliver high performance, efficiency, and versatility, making them ideal for various painting tasks.

The Graco 257100, also known as the TrueCoat 360DS, is a cordless airless paint sprayer. It features an innovative design that eliminates the need for cords and allows for maximum mobility. This model is equipped with a reversible spray tip, enabling users to easily clear clogs without interrupting their work. The TrueAirless technology ensures a smooth finish by providing a consistent spray pattern, while the dual-speed control allows for adjustments based on the surface being painted, making it suitable for both small and large projects.

Next up, the Graco 258906, or the Ultra Cordless Airless Handheld Sprayer, is another cordless option that promotes ease of use. It boasts a high-efficiency airless nozzle which minimizes overspray and maximizes coverage. The integrated paint storage container means minimal downtime for refills, and the adjustable fan pattern provides versatility across different surfaces. This sprayer is perfect for indoor and outdoor projects and is designed for users seeking both convenience and quality.

The Graco 262300, commonly referred to as the Ultra 395, is a professional-grade sprayer designed for heavy-duty applications. With its powerful motor and high-performance pump, it can handle a wide range of materials, including thicker coatings. The ProConnect feature allows for fast pump replacement without tools, reducing downtime on the job. Furthermore, this unit comes with a stainless steel piston pump, enhancing its durability and extending operational life.

Meanwhile, the Graco 262288 is the Titan 440. This sprayer is renowned for its reliability and ease of operation, making it suitable for both contractors and serious DIYers. It features a durable frame and is lightweight for easy transport. The adjustable pressure control allows users to dial in the perfect setting for any type of job, while the AutoPrime function ensures effortless priming even with low-viscosity paints.

Lastly, the Graco 258907, or the Magnum X5, is designed for occasional to semi-professional use. It comes equipped with a powerful motor and the PowerFlush cleaning system, which makes cleanup a breeze. Users appreciate the adjustable pressure control and the ability to spray directly from a 1-gallon or 5-gallon paint container. This model also includes a flexible suction tube that allows for easy paint access.

In conclusion, Graco's range of sprayers, including the 257100, 258906, 262300, 262288, and 258907, offers advanced technology and features tailored for various painting needs, ensuring smooth and professional results for every project.