HOW TO USE
4 | After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet. |
| On the control module, set the controls as follows: |
•Rotate the Volume control fully couterclockwise.
•Press the 3D and Mute buttons so that they are in the out position, not “engaged”.
•Turn the Bass, Treble, and Balance to the center detent position, “12 o’clock”.
Power switch
1. Push the S4 logo power switch located on the front the subwoofer.
2. The S4 MidiLand logo LED should illuminate.
5 To start making music, adjust the controls as follows:
•Start your music,
•Rotate the Volume control clockwise to the desired listening level.
•Adjust the Balance control left and right to audibly check your connections.
•Rotate the Bass and Treble left and right. You should noticably hear an increase or decrease in tone.
•For private listening, use the headphone jack locacted on the
•Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have any questions, look to our troubleshooting section.
•For further support
6