Athena Technologies AS-P300, AS-P400 Cabinet Care, Subwoofer Placement, Terminology and Controls

Page 3

o w n e r s

m a n u a l

CABINET CARE

Rear Panel - Diagram 2

Great care and craftsmanship have gone into the construction and finish of the cabinet. Periodically use a soft, dry cloth to remove dust or fingerprints. Do not use paper towel or other abrasive materials as it may damage the finish.

NOTE: Please retain the carton and packing material for the athena TECHNOLOGIES® products to protect them in the event of a move or if they need to be shipped to a service center. Product received damaged by a service center that has been shipped by the end user in other than the original packaging will be repaired, refurbished and properly packaged for return shipment at the end user’s expense.

SUBWOOFER PLACEMENT

The usual placement for a subwoofer is near the front speakers in your system. Whether it is an audio system, a video system, or both. The closer the proximity to the front speakers, the best balance and phase relationship is usually obtained. Be careful when placing the subwoofer too close to corners or walls as this increases the “boominess” of the subwoofers sound. This may or may not be to your liking. The position of the sub must be cosmetically acceptable, but keep in mind the position plays a large role in the overall sound of the system.

If after set up you are unhappy with the overall sound, try experimenting with the position of the sub. It’s surprising, but moving the unit a few inches one way or another can make dramatic changes to the sound of the bass response.

TERMINOLOGY AND CONTROLS

Front Panel - Diagram 1

1Subwoofer Volume Control - This controls the volume level of the subwoofers’ internal amplifier.

2Low Pass Filter Control - This controls the effective frequency range of the subwoofer. It has a range of 40-120 Hz to allow you to correctly match the output of the subwoofer with that of the rest of the system.

3Status Indicator - The Status indicator will emit a green light when the subwoofer is actively producing sound. The subwoofer is automatically activated by any signal from any of the inputs on the subwoofer. When the indicator is red, the subwoofer is in standby mode, and is ready to turn on as soon as the subwoofer receives a signal.

NOTE: The auto-on auto-off circuit does not instantly turn off the subwoofer. The subwoofer will remain in the “on” mode (green) for up to 10 minutes after the last signal, even when the system is turned off completely.

1Direct Input - This input is an RCA type mono input.

2Sub Input - This input is an RCA type mono input.

NOTE: Please see the connections section for suggestions on which input is appropriate for your system.

3High Level Inputs/Outputs - These are binding post type speaker connectors. The High Level inputs are designed to be used on receivers or amplifiers that do not incorporate any RCA type subwoofer outputs. If your receiver is equipped with an RCA type subwoofer output, these inputs & outputs will not be utilized.

HOW TO CONNECT AND USE

YOUR SUBWOOFER

Caution:

Do not use both low level RCA inputs simultaneously

Do not use both low level and high level inputs simultaneously

Turn off all power in your audio/video system before proceeding with your installation. Not doing so could result in potential damage to the system.

CONNECTING AND OPERATING THE SUBWOOFER - METHOD 1

If your front speakers are athena TECHNOLOGIES®

AUDITION Series Speakers

1.On the rear of the receiver there should be a single RCA type jack named

“Subwoofer Out” Connect a single RCA type audio cable from the “Subwoofer Out” jack to the “Sub Input” (jack #2 on diagram #2)

2.Plug the Subwoofer’s AC cord into an AC outlet. Do not use the accessory type AC outlets on the rear of the AV receiver.

3.Set the Low Pass Filter Control (knob #2 diagram #1) to match the model of speaker that you have in the front of your system.

For example if you have AS-F1 speakers, set the control to the F1 position. This will adjust the frequency output of the subwoofer to precisely match your speakers, and will result in a seamless system for music and movies.

4.Adjust the Volume Control (knob #1 diagram #1) to match the output of the system. This can be done to suit your personal taste, and room size. Start somewhere in the middle of the dial and adjust as you feel is necessary.

3

Image 3
Contents N e r s m a n u a l Company Background Important Safety Instructions Read CarefullyIntroduction BREAK-IN PeriodCabinet Care Subwoofer PlacementHOW to Connect and USE Your Subwoofer Connecting and Operating the Subwoofer MethodFor LFE or Home Theater Applications Warranty Outside United States and CanadaWarranty for United States and Canada With other brands of front speakersImportantes Consignes DE Sécurité Lire Attentivement AVANT-PROPOSPériode DE Rodage Raccordement ET Fonctionnement Méthode Terminologie ET CommandesEntretien DU Coffret Positionnement DE Lenceinte DEXTRÊMES-GRAVESPour entrées de niveau haut ou de type enceinte Garantie À Lextérieur DES ÉTATS-UNIS ET DU CanadaGarantie AU Canada ET AUX ÉTATS-UNIS Avec enceintes avant dautres marquesInstrucciones Importantes DE Seguridad Léanse Atentamente IntroducciónPeriodo Inicial Terminología Y Mandos Información Sobre LA CompañíaCuidado DE LA Caja Colocación DEL Bafle Para BajosPara aplicaciones LFE o de cine doméstico Garantía Fuera DE Estados Unidos Y CanadáGarantía Para Estados Unidos Y Canadá Con altavoces frontales de otras marcasT E S Warranty Garantie
Related manuals
Manual 8 pages 10.63 Kb

AS-P300, AS-P400 specifications

Athena Technologies has established itself as a leader in the field of sophisticated electronic systems and cutting-edge technologies. Among its standout products are the AS-P300, C.5, S.5, and AS-P400, which showcase an impressive array of features and capabilities designed to meet the demands of various applications.

The AS-P300 is designed with flexibility and efficiency in mind. It boasts a robust processing unit capable of handling complex computations, making it ideal for high-performance applications. The system supports a wide range of connectivity options, ensuring seamless integration with existing infrastructure. Notably, its modular architecture allows users to customize configurations based on specific project requirements, enhancing its versatility.

The C.5 series stands out with its focus on compactness and energy efficiency. It incorporates advanced power management technologies, significantly reducing energy consumption without compromising performance. The C.5 is particularly suitable for mobile applications, where space and power are at a premium. Featuring state-of-the-art thermal management systems, it ensures optimal performance even under demanding conditions.

On the other hand, the S.5 system emphasizes scalability, making it ideal for growing enterprises. With its expandable architecture, organizations can easily scale up their operations without needing to overhaul existing systems. The S.5 employs advanced data processing algorithms, enabling real-time analytics and decision-making capabilities that are crucial for modern business environments.

Finally, the AS-P400 represents the pinnacle of Athena Technologies’ offerings. It integrates all the best features of its predecessors while introducing groundbreaking technologies such as artificial intelligence and machine learning capabilities. This system is designed for more complex tasks, providing users with predictive analytics and automated decision-making tools that streamline operations and enhance productivity.

These products collectively exemplify Athena Technologies' commitment to innovation and quality. Their emphasis on modularity, energy efficiency, scalability, and advanced features positions them as ideal solutions for a range of industries, including telecommunications, healthcare, and manufacturing. Customers can expect reliability and cutting-edge performance from these systems, ensuring that they remain at the forefront of technological advancement in their respective fields.