Before installing this unit | Goodman Mfg IO-367B manual

•Do not skid or slide on any surface as this may damage unit base. The unit must be stored on a flat, level surface. Protect the condenser coil because it is easily damaged.

ROOF CURB INSTALLATIONS ONLY:

Before installing this unit...

IMPORTANT NOTE: This unit has been equipped with a ship- ping brace under the compressor section that MUST BE RE- MOVED before installing the unit on a roof curb.

Please follow the instructions below to remove brace.

CAUTION

WHEN UNIT IS SUSPENDED, BOARDS AND SHIPPING BRACE WILL DROP WHEN SCREWS ARE REMOVED. TO PREVENT PERSONAL INJURY, STAND CLEAR. REMOVE FORK HOLE BRACKETS, BOARDS AND SHIPPING BRACE FROM BOTTOM OF UNIT BEFORE PLACING UNIT ONTO CURB.

1.Remove wooden struts and shipping brace per installation instructions. The struts are located in the fork holes and are used to protect the unit from damage while lifting with forks. The shippping brace is located underneath the unit (under compressors). Also remove the fork hole brackets as shown in the following figure.

2.Locate and remove the end brackets as shown below.

LIFT OVERAPPROXIMATE

CENTER OF UNIT

SPREADER BARS

MUST BE USED WITH

LIFTING STRAPS THAT

ARE LESS THAN 16

FEET LONG

3.Lift unit per the “Rigging Details” section of this manual, observing all warnings and cautions. When unit is lifted, boards and shipping brace will drop if screws have been removed. To avoid injury, STAND CLEAR.

4.Dispose of the boards and brace appropriately.

Curb installations must comply with local codes and should be done in accordance with the established guidelines of the National Roofing Contractors Association.

Proper unit installation requires that the roof curb be firmly and permanently attached to the roof structure. Check for adequate fastening method prior to setting the unit on the curb.

Full perimeter roof curbs are available from the factory and are shipped unassembled. Field assembly, squaring, level- ing and mounting on the roof structure are the responsibility of the installing contractor. All required hardware necessary for the assembly of the sheet metal curb is included in the curb accessory.

WARNING

TO PREVENT POSSIBLE EQUIPMENT DAMAGE, PROPERTY DAMAGE, PERSONAL INJURY OR DEATH, THE FOLLOWING BULLET POINTS MUST BE OBSERVED WHEN INSTALLING THE UNIT.

•Sufficient structural support must be determined prior to locating and mounting the curb and package unit.

•Ductwork must be constructed using industry guidelines. The duct work must be placed into the roof curb before mounting the package unit. Our full perimeter curbs include duct connection frames to be assembled with the curb. Cantilevered type curbs are not available from the factory.

•Curb insulation, cant strips, flashing and general

roofing material are furnished by the contractor.

The curbs must be supported on parallel sides by roof mem- bers. The roof members must not penetrate supply and re- turn duct opening areas as damage to the unit might occur.

NOTE: The unit and curb accessories are designed to allow vertical duct installation before unit placement. Duct installation after unit placement is not recommended.

REMOVE 2 BRACKETS	REMOVE 2 BRACKETS
ON EACH END TO	ON EACH END TO
REMOVE	REMOVE
SHIPPING BRACE	WOODEN STRUTS

IO-367B specifications

Goodman Manufacturing, a well-respected name in the HVAC industry, offers an impressive range of products tailored to enhance energy efficiency and comfort in residential environments. Among their standout offerings is the IO-367B model, a heat pump designed to deliver exceptional performance, reliability, and user-friendly features.

The Goodman IO-367B is a split system heat pump that provides both heating and cooling capabilities, making it a versatile choice for homeowners looking to maintain an optimal indoor climate year-round. Its sleek design allows for easy installation and integration into existing systems, ensuring minimal disruption during the setup process.

One of the key features of the IO-367B is its energy efficiency. With a high SEER (Seasonal Energy Efficiency Ratio) rating, it operates smoothly and effectively while keeping energy consumption low. This not only leads to lower utility bills for homeowners but also supports environmentally friendly practices by reducing the overall carbon footprint. The unit is compliant with the latest energy regulations, making it a future-proof investment for those who prioritize sustainability.

The IO-367B employs advanced technology, including a multi-speed compressor that adjusts operation to meet the specific heating or cooling demands of a space. This feature enhances comfort by reducing temperature fluctuations and maintaining a consistent climate. Additionally, its sound-dampening features ensure quieter operation, making it an excellent choice for both indoor and outdoor installations.

Other notable characteristics include the durable construction of the heat pump, which is designed to withstand varying weather conditions. Its corrosion-resistant cabinet enhances longevity and reliability, ensuring that homeowners can depend on their system for years. Furthermore, Goodman provides a generous warranty on the IO-367B, reflecting their confidence in the product’s durability and performance.

In conclusion, the Goodman IO-367B heat pump stands out in the market due to its energy efficiency, advanced technology, and sturdy design. Ideal for those seeking to enhance their home's comfort while being mindful of energy consumption, this model is a reliable solution for heating and cooling needs.