Genelec manual 8240A 8250A

	8240A	8250A
Analog audio input connector	XLR female, pin 1 gnd, pin 2 +, pin 3 -
Analog audio input impedance	10 kOhm balanced
Input level for maximum short term output of 100 dB SPL @ 1m	Adjustable from +6 to -6 dBu
Crossover frequency, Bass/Treble	3.0 kHz	1.8 kHz
Treble Tilt control operating range in 2 dB steps	+2 to -4 dB & MUTE	+2 to -4 dB & MUTE
	@ 15 kHz	@ 15 kHz
Desktop low frequency control operating range	-4 dB @ 160 Hz	-4 dB @ 160 Hz
Bass Roll-Off control operating range in 2 dB steps	0 to -6 dB @ 45 Hz	From 0 to -6 dB @ 35 Hz
Bass Tilt control operating range in 2 dB steps	0 to -6 dB & MUTE	0 to -6 dB & MUTE
	@ 100 Hz	@ 100 Hz
	The 'CAL' position is with all tone controls set to 'off'
	and the input sensitivity control to maximum (fully
	clockwise)

	8240A	8250A
Digital audio input connector	XLR female
Digital audio input impedance	110 Ohm
Digital audio Thru output connector	XLR male
Digital audio Thru output impedance	110 Ohm
Digital audio format	AES/EBU (AES3-2003)
	Can also be used with S/P-DIF and AES3id signals
	when impedance converters are used
Digital audio word length	16 bits, maximum 24 bits.
	Fixed point, AES/EBU format
Digital audio sample rate	32 kHz, maximum 192 kHz
	Supports single-wire and dual-wire AES signals.
AD conversion dynamic range	122 dB
	Gain-ranging operation in two gain ranges; converter
	dynamic range 112 dB typical

14