Onkyo C-7030 instruction manual Specifications, Troubleshooting-Continued, En-27

Models: C-7030

1 28
Download 28 pages 39.62 Kb
Page 27
Image 27
Troubleshooting—Continued
Audio Output (Digital/Optical): Audio Output/Impedance (Digital/Coaxial):
Operation Condition Temperature/Humidity:
Power Supply North American: Other:
Power Consumption: Stand-by Power Consumption
North American: Other:
Dimensions:
(W × H × D) Weight:
Disc Compatibility:*

Troubleshooting—Continued

You’re not pointing the remote controller at the C-7030’s remote sensor. Point the remote controller at the C-7030’s remote sensor (page 10).

You’re too far away from the C-7030. Move the remote controller closer to the C-7030 (page 10). The remote con- troller has a range of approximately 5 meters (16 ft.).

A strong light source is interfering with the C-7030’s remote sensor. Make sure that the C-7030 is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if necessary.

If the C-7030 is installed in a cabinet with colored glass doors, the remote controller may not work reliably when the doors are closed. Open the doors, or use a cabinet without colored glass.

does not work.

There’s no analog audio connection. To use you must make an analog audio connection between the C-7030 and your Onkyo AV receiver, even if they are connected digitally.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by malfunctions of the unit. Before you record important data, make sure that the material will be recorded correctly.

The C-7030 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, unplug the power cord, wait at least 10 seconds, and then plug it again.

Specifications

Frequency Response:

4 Hz – 20 kHz

Audio Outputs

 

Audio Dynamic Range:

100 dB

Digital Outputs:

1 (OPTICAL), 1 (COAXIAL)

THD (Total Harmonic

 

Analog Outputs:

1

Distortion):

0.0029 %

 

 

Signal to Noise Ratio:

107 dB

Others

 

Rated RCA Output Level and

2.0 V (rms) / 600 Ω

RI:

2

Impedance:

 

 

–22.5 dBm

Specifications and features are subject to change without notice.

0.5 V p-p / 75 Ω

5 °C–35 °C/ 5 %–85 %

AC 120 V, 60 Hz

AC 220–240 V, 50/60 Hz

12 W

0.1 W

0.2 W

435 × 101 × 306 mm

(17 1/8 × 4 × 12 3/64 inches)

5.3 kg (11.7 lbs)

Audio CD, CD-R, CD-RW, MP3/WMA (CD-R, CD-RW)

*Discs that have not been properly finalized may only be partially playable or not playable at all

En-27

Page 27
Image 27
Onkyo C-7030 instruction manual Specifications, Troubleshooting-Continued, En-27