Uniden DECT1580 manual Troubleshooting

	When you have this	Try...
	problem...
		• Checking to see that there are not two handsets already using the conference
	I can’t get two handsets to	feature (see page 38).
		• Making sure another handset is not in Privacy Mode (see page 40).
	talk to an outside caller.
		• Making sure both handsets are registered to and currently connected to the same
		base (see pages 14 and 15).
	The answering system does	• Checking the AC adapter connection (see page 8).
	not work.	• Checking to see if the answering system is turned on (see page 47).
		• The memory may be full. Delete some or all of the saved messages (see page
Troubleshooting	The answering system does	49).
	not record any messages.	• Checking to see that the message record time is not set to announce only (see
	Messages are incomplete.	• The incoming messages may be too long. Ask callers to leave a brief message.
		page 45).
	The answering system
	doesn’t say what time	• Checking to see if you have set the time (see page 23).
	messages were recorded.
		• The memory may be full. Delete some or all of the saved messages (see page 49).
	I can’t hear base or handset	• Adjusting the speaker volume on the base or handset (see pages 36 and 37).
	speaker during call screening
		• Checking to see if the call screen feature is set to on (see page 46).
	or message playback.
	I can’t access answering	• Checking to see if you are using the correct PIN number (see page 50).
	system from a remote	• Checking to see if the touch-tone phone you’re using can transmit the tone for at
	phone.	least two seconds. If it cannot, try using a different touch-tone phone.

58