Uniden DECT1580 manual Finding a Lost Handset, Using Hold, Conference and Transfer, Conferencing

a Lost Handset Conference and Transfer

Finding a Lost Handset

To locate a misplaced handset, press find on the base when the phone is in standby. The handsets connected to the paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press find again or any key on the found handset.

Note: Handsets that are not currently connected to this base will not be paged.

Using Hold, Conference and Transfer

Placing a Call on Hold

1)During a call, press Clear/Int’com to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.

2)To return to the party on hold, press TALK/Flash or . The phone will return to the holding party.

Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be disconnected and the phone will return to standby.

Finding Using Hold,

•While a call is on hold, Call Waiting and CID on Call Waiting do not work.

Conferencing

If you have more than one handset, up to three people can participate in a conference call. A three-way conference call consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must be currently connected to the same base (see page 15).

1)Press TALK/Flash or to join the call.

2)To hang up, return the handset to the cradle or press END. The other party will still be connected to the call.

Outside call

Handset #2

Handset #1

38