Uniden DECT1580 manual Removing the wall-mount bracket, Wall plate, Wall Mounting the Base

Models: DECT1580

1 76
Download 76 pages 28.43 Kb
Page 53
Image 53
Removing the wall-mount bracket

Place the mounting slots over the pins on the wall plate.

Slide the base down to lock it into place.

Removing the wall-mount bracket

At the bottom of the base, pinch the two "nose" of the wall-mount bracket as shown, and then slide the bracket away from the base.

Wall plate

(To AC outlet)

 

 

Note: Mounting the phone directly on the wall

Be sure the wall is capable of supporting the weight of the phone, and use the proper type of

anchoring device for the wall material.

Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 inches apart.

Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone.

• Align the mounting slots over the screws and slide the base down into place as shown above.

53

Wall Mounting the Base

Page 53
Image 53
Uniden DECT1580 manual Removing the wall-mount bracket, Wall plate, Note Mounting the phone directly on the wall