Onkyo C-7030 instruction manual Connecting the CD Player-Continued, Connections, En-14

Connecting the CD Player—Continued

Connections

With  (Remote Interactive) you can control the C-7030 together with your other -compatible Onkyo AV components. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components and use the following special functions:

Direct Change

If your C-7030 is connected to an -compatible Onkyo hi-fi amp or AV receiver, when you start playback on the C-7030, the AV receiver will select the C-7030 as the input source.

Remote Control Operation

You can control the C-7030 by using your Onkyo ampli- fier’s remote controller. See the amplifier’s instruction manual for details.

To use the functions, you need to connect one of the C-7030’s connectors to an connector on another AV component in your system by using the supplied  cable.

See the manuals supplied with your other -compati- ble AV components for more information.

Notes:

•Use only cables for connections.

•The C-7030 has two connectors. You can connect either one to your Onkyo hi-fi amp or AV receiver. The other connector is for connecting additional -com- patible components.

•Connect the C-7030’s connector only to Onkyo AV components. Connecting to other manufacturer’s AV components may cause them to malfunction.

•Some Onkyo -compatible AV components may not support the special functions described here.



(RCA/phono) between the C-7030 and your other Onkyo component even if they are connected digitally.To use you must make an analog audio connection

Disconnect the power cord before making any connections!

Coaxial cable (not supplied)

cable (supplied)

RCA/phono audio cable (supplied)

L	R
CD		Coaxial IN

Onkyo Hi-fi amp, AV receiver

En-14