Mitsubishi Electronics LT-2220/LT-3020 manual Cable Box, Connecting the VCR with cable box

Connecting an Antenna to a Cable Box and VCR, Connecting Audio/Video to the Cable Box or VCR

Note: The TV side panel and connections shown here are for reference only and may vary by model.

�� ���� ����� �������� �������

�

����� ��� ���� ���������

Cable Box

(Figure 5)

1.Connect the incoming cable to ANT on the TV side panel.

NOTE: For best performance, please see Composite Video with Audio or S-Video with Audio, below.

�

��� ��

��� ���� �����

�

�������� �����

�

��

�������

�

���

����� ���	����� ��	����� ���
�	�	�����
�	�	�
		�������
�	�

Figure 5. Connecting the VCR with cable box.

�� ���� ����� � ����

���

�
�����	������������ �� ����������
	�	������ ����
		��� ����� ����

					�
					������
					����
				�� ���� ��� ��� � �����	���
				������� �� �� ������	�����
��� ���� �����				������� ��� �� ����	����
					�
		����� ���	����� ��	����� ���
��	�����	�	�	�����
� �������		�	�	�
				�������
	���
		�	�
���

Figure 6. Connecting the VCR Audio/Video.

16

Composite Video with Audio or S- Video with Audio (Recommended)

(Figure 6)

1.Connect a video or an S-Video cable from VIDEO OUT on the VCR back panel to VIDEO or S-VIDEO, INPUT-1 or INPUT-2 on the TV side panel.

2.Connect a set of audio cables from AUDIO OUT on the VCR back panel to AUDIO INPUT-1 or INPUT-2 on the TV side panel.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

If your VCR is mono (non-stereo), connect only the white (left) cable.

You may connect to the S-VIDEO or VIDEO terminal but not to both.

LCD Monitor 5 8 03.indd 16

5/8/2003, 3:02 PM