Other S-Video Device

Connecting a DVD Player or Other S-Video Device

Note: The TV side panel and connections shown here are for reference only and may vary by model.

�

��

�

��

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV side panel. The correct connections are:

A. Y to Y

B. Cb or Pb to Pb

C. Cr or Pr to Pr

2. Connect a set of audio cables from AUDIO OUT
	on the back of the DVD player to COMPONENT
	AUDIO Input (1 or 2) on the TV side panel.
•	The red cable connects to the R (right)channel
•	The white cable connects to the L (left) channel

See Appendix B, page 58, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

NOTE: Some video game systems support component connections. Please refer to your video game console Owner’s Guide.

NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. Please refer to your DVD player’s

�

��

�

Owner’s Guide.

(Figure 10)

1.Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV side panel.

2.Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV side panel.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

�

If your S-Video Device is mono (non-stereo), connect only the white (left) cable.

LCD Monitor 5 8 03.indd

5/8/2003, 3:02 PM