Connecting the Power Cord
Before connecting the power cord, connect all of the other components.
Plug the power cord into a suitable electrical outlet
Basic Operation
Turning On CD Player
ON/STANDBY
DIMMER DISPLAY
To turn on the CD Player, press the [ON/STANDBY] button on the unit or the remote controller. Press the [ON/STANDBY] button again to set the CD Player to Standby.
Setting Auto Standby (ASb)
ENTER
ENTER
You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off, plac- ing the unit in Standby mode (Auto Standby function).
On the North American model:
The default setting is “Off”.
On the European model:
The default setting is “On”.
Make settings for this function while playback is stopped.
1 Press the [SETUP] button.
2 Use the [] or [] button to display “ASb”; then press the [ ENTER ] button.
3 Use the [] or [] button to switch “Off” or
“On”; then press the [ ENTER ] button.
4 “COMPLETE” appears on the display.
Note:
If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby func- tion will not operate.
Changing the Display Brightness
Press the remote controller’s [DIMMER] | DIMMER |
button repeatedly to select the following |
|
options: |
|
Normal 
Dim 
Dimmer
Using Headphones
Turn down the volume, then connect your stereo head- phones to the [PHONES] jack.
You can adjust the volume by using the [PHONES LEVEL] knob.
PHONES
jack
