Package Cooling Specifications

PACKAGE COOLING SPECIFICATIONS				GPC14[24-36]H41A*
			GPC1424H41*		GPC1430H41*	GPC1436H41*

	COOLING	COOLING CAPACITY, BTUH	24,600		28,400	35,600
	CAPACITY	SEER / EER	14.5 / 12.1		14.0 / 12.0	14.0 / 12.0

	UNIT	VOLTAGE (NAMEPLATE)	208-230/1/60		208-230/1/60	208-230/1/60
	ELECTRICAL	AMPS (TOTAL)	10.5		13.16	20.06
	SPECIFICATION	MINIMUM CIRCUIT AMPACITY	12.5		15.6	24.2
		MAXIMUM OVERCURRENT PROTECTION (1)	20		25	40
	COMPRESSOR	TYPE	RECIP		RECIP	SCROLL
		RATED LOAD AMPS	7.9		9.8	16.7
		LOCKED ROTOR AMPS	41		55	79

	CONDENSER	HORSEPOWER	1/6		1/4	1/4
	FAN MOTOR	RPM	815		830	830
		FULL LOAD AMPS	1.1		1.5	1.5
		LOCKED ROTOR AMPS	1.7		3.0	3.0
	CONDENSER FAN	BLADE DIAMETER (INCHES) / NUMBER OF BLADES	22 / 3		22 / 3	22 / 3

	CONDENSER	FACE AREA - SQ. FT.	13.4		13.4	13.4
	COIL	NUMBER OF ROWS	1		1	1
		FINS PER INCH	24		24	24

	EVAPORATOR	HORSEPOWER - NO. OF SPEEDS	1/2 - 5		1/2 - 5	1/2 - 5
	BLOWER	FULL LOAD AMPS	1.5		1.86	1.86
	MOTOR	LOCKED ROTOR AMPS	NA		NA	NA
		MOTOR SPEED TAP - COOLING	T2		T2	T2
		RPM	1050		1050	1050

	EVAPORATOR	DIAMETER X WIDTH (INCHES)	10 X 8		10 X 8	10 X 8
	BLOWER	HI EFFICIENCY COOLING CFM	850		1,050	1,200
		5 TON NOMINAL COOLING CFM	NA		NA	NA
		FAN ONLY COOLING CFM	800		950	1,100
		MAX EXTERNAL STATIC PRESS ("w.c.)	0.5		0.5	0.5

	EVAPORATOR	FACE AREA - SQ. FT.	5.25		4.67	5.2
	COIL	NUMBER OF ROWS	3		4	3
		FINS PER INCH	16		16	14

	GENERAL	FILTER SIZE - SQ. FT. *	20 x 20 x 1		20 x 25 x 1	25 x 25 x 1
	INFORMATION	DRAIN SIZE (INCHES)	3/4"		3/4"	3/4"
		EXPANSION DEVICE	ORIFICE (0.057)		ORIFICE (0.060)	ORIFICE (0.065)
		REFRIGERANT CHARGE R-410A (Oz.)	83		78	80
		POWER SUPPLY CONDUIT KNOCKOUT SIZE (INCHES)	3/4, 1, 1-1/4		3/4, 1, 1-1/4	3/4, 1, 1-1/4
		LOW VOLTAGE CONDUIT KNOCKOUT SIZE (INCHES)	1/2		1/2	1/2
		SHIPPING WEIGHT LBS.	310		310	370
		OPERATING WEIGHT LBS.	300		300	360

(1)Maximum Overcurrent Protection Device: MUST use Time Delay Fuse or HACR type Circuit Breaker of the same size as noted. * Calculated external filter size based on air velocity of 300 ft/min.

Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.

Unit specifications are subject to change without notice. ALWAYS refer to the units serial plate for the most up-to-date general and electrical information.

IMPORTANT: While this data is presented as a guide, it is important to electrically connect the unit and properly size wires and fuses/circuit breakers in accordance with the National Electrical Code and/or all local codes. Data shown is w/o electric heaters.

All wires and overcurrent protection devices are sized for use with electric heaters only and without WARNING refrigeration. If heaters are not installed with above wire size, overheating and fire could occur. See PACKAGE COOLING SPECIFICATIONS section for minimum circuit ampacity and maximum overcurrent

protection during refrigeration cycle.

R-410A specifications

Goodman Manufacturing, a well-respected name in the HVAC industry, has made significant advancements with their R-410A refrigerant technology. R-410A, a hydrofluorocarbon (HFC), has positioned itself as a superior alternative to the older R-22 refrigerant, which has been phased out due to its ozone-depleting properties. Goodman’s commitment to energy efficiency and environmental sustainability is well reflected in their use of R-410A in their air conditioning and heat pump systems.

One of the main features of Goodman’s R-410A systems is their exceptional energy efficiency. The R-410A refrigerant operates at a higher pressure than R-22, which allows for better heat transfer and improved cooling capacity. This results in reduced energy consumption and lower utility bills for consumers. Goodman’s air conditioning units designed for use with R-410A are often rated with high Seasonal Energy Efficiency Ratio (SEER) ratings, making them an eco-friendly choice for residential and commercial applications.

Another notable technology employed by Goodman is their commitment to reliable performance through advanced compressor designs. Goodman's scroll compressors are optimized for R-410A, ensuring quieter operation and reducing vibration levels. These compressors are known for their efficiency and longevity, making them a favorite among homeowners seeking dependable and durable climate control solutions.

Goodman's multi-stage cooling systems that utilize R-410A offer precise temperature control and enhanced comfort. By controlling the speed of the compressor, Goodman’s units can adjust output according to the heating or cooling demand, maximizing comfort while minimizing energy waste. This adaptability not only enhances indoor air quality but also contributes to a greener environment by using less energy.

Furthermore, Goodman incorporates high-tech diagnostic controls into their systems. These controls provide real-time performance data, allowing homeowners and technicians to monitor system status and troubleshoot issues more easily. By using R-410A combined with these innovative technologies, Goodman emphasizes reliability and user-friendly operation.

In conclusion, Goodman Manufacturing’s use of R-410A refrigerant reflects their dedication to efficiency, reliability, and environmental stewardship in HVAC solutions. The combination of advanced compressor technologies, high energy efficiency, and innovative controls solidifies Goodman’s reputation as a leader in the industry, offering homeowners and businesses the comfort and peace of mind they deserve.

GPC14[24-36]H41A*

GPC1424H41*

GPC1430H41*

GPC1436H41*

INFORMATION

R-410A specifications