3 | Start recording. |
Deck B | To record from the CD player or |
| the radio, press r on deck B (( is |
| depressed automatically.) |
Deck A | To record from the tape, press P |
| and (on deck A. (For high speed |
| dubbing, press HIGH SPEED |
| DUBBING instead.) Then press r |
Deck B | on deck B (( is depressed |
| automatically). |
Basic Operations
Tips
•Adjusting the volume or the audio emphasis (see page 17) will not affect the recording level.
•For the best results, use the AC power as a power source for recording.
•If the AM program makes a whistling
sound after you’ve pressed rin step 3, set the ISS (Interference Suppress Switch) at the rear to the position that most decreases the noise. Normally set the switch to “2”.
•To erase a recording, proceed as follows:
1Insert the tape whose recording you want to erase into the tape compartment on deck B.
2Set FUNCTION to
TAPE (CD/RADIO OFF).
3Press ron deck B.
Use these buttons for additional operations
| p6 | P |
To | Press |
|
Stop recording | p6on deck B | |
Pause recording | Pon deck B |
|
| Press the button again to | |
| resume recording. | |
Basic Operations
11