Creating your own program
(Program Play)
You can arrange the playing order of the tracks on a CD.
FUNCTION DISPLAY/ENT | p | |
= / + | PLAY MODE | ^ |
AMS/ |
|
|
SEARCH |
|
|
|
| The CD Player |
Tips
•You can play the same program again, since the program is saved until you open the CD compartment or switch
FUNCTION.
•The current program will be erased if you switch FUNCTION or open the CD compartment.
•You can record your own program. After you’ve created the program, insert a blank
tape into deck B and press r on deck B to start recording.
1 Set FUNCTION to CD.
2 PressPLAY MODE until “PGM” appears in the display.
3 Press +or = AMS/SEARCH then press DISPLAY/ENT for the tracks you want to program in the order you want. You can program up to 20 tracks.
Programed track
Playing order
4 Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until “PGM” disappears in the display.
To change the current program
Press p once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure.
The CD Player 15