Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 107 MHz (Korean model)
87.6- 108 MHz (Other models) AM: 530 - 1,605 kHz (Australian model)
531 - 1,602 kHz (Korean model)
530 - 1,710 kHz (Other models)
Aerials
FM: Telescopic aerial
AM:
Cassette-corder section
Recording system
Approx. 140 s (sec.) with Sony cassette
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm dia., 4 ohms, cone type (2) Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (excluding US model)
3 W + 3 W (at 4 ohms, 10 % harmonic distortion in AC operation) (Korean model) 3 W + 3 W (at 4 ohms, 10 % harmonic distortion) (Other models)
Power requirements
230 - 240 V AC, 50 Hz (Australian model)
220 V AC, 60 Hz (Korean model)
120 V AC, 60 Hz (Other models)
12 V DC, 8 size D (R20) batteries Power consumption
AC 20 W (Korean model) AC 26 W (Other models)
Battery life
For CD radio
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 19 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 12 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 4.5 h
Dimensions
Approx. 580 × 164 × 250 mm (w/h/d)
(22 7⁄8 × 6 1⁄2 × 9 7⁄8 inches) (incl. projecting parts) Mass
Approx. 5 kg (11 lb.) (incl. batteries) Supplied accessory
AC power cord (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series
Additional Information
23