Product Specifications
Unit Clearances
Maintain an adequate clearance around the unit for safety, service, maintenance, and proper unit operation. Leave a total clearance of 75” on the main control panel side of the unit for possible removal of fan shaft, coil, electric heat, and gas furnace. Leave a clearance of 48” on all other sides of the unit for possible compres-
sor removal or service access, and to ensure proper ventilation and condenser airflow. Do not install the unit beneath any obstruction. Install the unit away from all building exhausts
to inhibit Ingestion of exhaust air into the unit’s fresh- air intake.
36” minimum roof overhang
Electrical Entrance Locations
12¹/₈”
3³/₅”
High-Voltage
EntranceLow-
Voltage
3⁴/₅” Entrance
www.goodmanmfg.com | 13 |