Listening to the Radio
1 Press RADIO ON•BAND to turn on the radio.
2 Press RADIO ON•BAND repeatedly to select AM or FM.
3 Press TUNING+/– to tune in to the desired station.
If you keep pressing TUNING+/– for a few seconds, the Walkman will start tuning to the stations automatically.
To turn off the radio
Press p•RADIO OFF .
To improve the broadcast reception
•For AM: The Walkman has a
•For FM: Extend the cord of the remote control, the aerial. If the reception is still not good, press MENU repeatedly to set the cursor to FM MODE in the display. Then press SET to show “MONO” (monaural).
Note
•Do not remove the power sources while listening to the radio, or the received stations may not be stored.
Presetting Radio Stations
Once you store your favorite stations in memory, you can play them easily. You can preset up to
8 stations for FM and 8 stations for AM of each mode (Eur, Jpn, USA).
Tuning the Area
Manually (Manual Area
Call)
When you choose 1 to 8 or the JR area number, the table of Area number (factory preset) will automatically store.
1Press RADIO ON•BAND to turn on the radio.
2Press ENTER to flash the frequency, PRESET and the preset number in the display.
3Hold down RADIO ON• BAND until “AREA 1” will flash in the display.
4While “AREA 1” is flashing, press PRESET+/– repeatedly to select and area number from 1 to 8 or JR area number and then press ENTER.
5Press RADIO ON•BAND repeatedly to select AM or FM and then press PRESET+/– to select a preset number you wish to listen to.
42