Greenheck Fan 474118 Installation, Unit Weights ERS Plenum Section Only, Top view

Page 4

Installation

ERS plenum cabinets and fan bypass air plenums are to be rigged and moved by the lifting brackets

provided. Handle

 

in such a manner

 

as to keep from

 

scratching or

 

chipping the

 

coating. Damaged

Fan Bypass

finish may reduce

Air Plenum

ability of cabinet

Lift Points

 

to resist corrosion.

 

See coating repair

 

section of this

 

manual for details

Top view of

involving touch-

up of damaged

Bypass Air Plenum

surfaces.

ERS Plenum Housing

Lifting Bracket (removable after installation)

Roof Curb

 

TOP VIEW

 

of

 

PLENUM SECTION

Service

Service

Door

Door

Service

Door

CAUTION

When installing an ERS plenum cabinet, ensure the proper protective devices are used to protect personnel from moving parts and other hazards.

Check local codes to ensure compliance for all protective devices.

ERS plenum cabinet with coil section should be lifted/ hoisted by lifting brackets provided. These brackets are located around the lower perimeter of the plenum cabinet.

1.Before lifting, be sure that all shipping material has been removed from unit.

2.To assist in determining rigging requirements, weights are shown below.

3.Unit must be lifted by the lifting brackets provided on base structure.

4.Rigger to use suitable mating hardware to attach to unit lifting brackets.

5.Two spreader bars must span the unit to prevent damage to the cabinet by the lift cables.

6.Always test-lift the unit to check for proper balance and rigging before hoisting to desired location.

7.Never lift units in windy conditions.

8.Preparation of curb and roof openings should be completed prior to lifting unit to the roof. Verify the curb has the gasket seal on the top surface.

9.Do not use fork lifts for handling unit.

Unit Weights (ERS Plenum Section Only)

Cabinet

Cabinet

Weight

Size

Height

(lbs)*

020

075

3700

090

4500

 

030

075

4300

090

4900

 

040

075

5400

 

 

090

6100

 

 

 

 

 

075

6900

 

 

 

060

090

7800

 

 

 

 

110

8300

 

 

 

*Weights shown are for largest coil and filter options per cabinet size. Based on dry weight. Weights for custom designed units may vary.

4Vektor ERS-MD Energy Recovery Plenum Laboratory Exhaust

Image 4
Contents Installation, Operation and Maintenance Manual General Safety InformationInspection and Maintenance during Storage ReceivingUnpacking HandlingTable of Contents Unit IdentificationInstallation Unit Weights ERS Plenum Section OnlyCabinet Weight Size Height Lbs Top viewPlenum Service Clearances and Access Locations Installation Vektor Riser InstallationSet the Vektor fan bypass air plenum GasketingPlenum Side Inlet Duct Dimension Duct ConnectionsPlenum Bottom Inlet Opening Duct ConnectionsInstallation of Water Coil Piping Water Coil Installation RecommendationsDrain Trap CoilsCoil Installation Checklist Filter ReplacementExternal Pipe Connection Optional Accessories Vektor Field Coating Touch-up Procedure for Scratched AreasDirty Filter Sensor Magnehelic Gauge Vapor Tight LightsRoutine Maintenance Coil MaintenanceService Warranty Maintenance LogCoil Change Out Procedure Cabinet Minimum Clearance Size Inches

474118 specifications

The Greenheck Fan 474118 is a robust ventilation solution designed for a wide range of applications in commercial and industrial environments. Known for its efficiency and durability, the Greenheck 474118 stands out as a reliable choice for building professionals.

One of the primary features of the Greenheck Fan 474118 is its high-performance EC motor technology. This advanced motor type is designed to provide exceptional energy savings while delivering optimum airflow performance. By utilizing an electronically commutated motor, the 474118 ensures that users benefit from lower operational costs without compromising on effectiveness.

The fan is engineered with a heavy-gauge steel construction, offering significant durability. This robust design not only withstands the rigors of demanding environments but also ensures long-term reliability. Furthermore, the fan's corrosion-resistant finish adds another layer of protection, making it suitable for installations in various climates and conditions.

Noise reduction is another critical aspect of the Greenheck 474118. Equipped with a specially designed fan blade, it operates smoothly, minimizing operational noise. This characteristic makes it a perfect choice for applications where ambient noise levels must be kept to a minimum, such as offices, schools, and hospitals.

An important feature of the Greenheck 474118 is its versatility in airflow applications. It is available in multiple sizes and configurations, allowing it to meet diverse ventilation needs. Whether it's for exhaust, supply, or make-up air, this model can accommodate various installation requirements, providing flexibility for architects and engineers.

Additionally, the Greenheck 474118 integrates smart technology for enhanced control and monitoring. With options for building automation integration, users can effectively manage airflow, improving overall system efficiency. The control options extend to variable speed operation, ensuring that the fan can be adjusted as per the specific demands of the application.

In terms of installation, the Greenheck 474118 is designed for easy access and maintenance. Its user-friendly design allows service personnel to perform routine checks and repairs with minimal disruption.

In summary, the Greenheck Fan 474118 is a high-efficiency, versatile, and durable ventilation solution. With its advanced motor technology, noise reduction features, and ease of maintenance, it is an excellent investment for anyone looking to enhance their indoor environment's air quality and energy efficiency. Its ability to adapt to various systems makes it a preferred choice in the HVAC industry.