Maxtor pmn user manual Specifications

		ALL ABOUT IMAGE RECOGNITION & PROCESSING
		6. Specification and
		configuration
1. SPECIFICATIONS
MODEL NO		Stand alone DVMR
	INPUT	4 CH INPUT 1.0 VP-P, 75 OHM UNBALANCED (BNC TYPE)
	OUTPUT	3 OUTPUT VBS : 1.0VP~P.75 OHM UNBALANCED (BNC TYPE)
VIDEO I/F	HORIZONTAL RESOLUTION	480TV LINES
	S/N RATIO	MORE THAN 4dB
	COLOR	16.7 MILLION
	SPLIT SCREEN	FULL, QUAD DISPLAY
	ZOOM	LIVE & PB AVAILABLE
MONITORING	PIP	AVAILABLE
METHOD	SEQUENCE	AVAILABLE
	SCREEN QUALITY	FULL : 720(H)X480(V) ACTIVE PIXELS
		1/4 SCREEN : 360(H)X240(V) ACTIVE PIXELS
	SPEED	0.1~30 FRAME/SEC (EACH CHANNEL)
		JPEG
RECORDING	SIMPLEX/DUPLEX	DUPLEX(PLAYBACK/RECORDING)
/PLAY	PICTURE RECORDING	QUAD SCREEN RECORDING
FUNCTION	METHOD	FIELD SWITCHER METHOD FULL SCREEN RECORDING
	REC, MODE	REAL-TIME/ TIME-LAPSE / EVENT
	TRACK PLAY	SEARCH, STILL
	WEB INTERFACE	TCP/IP with client software
	POST ALARM FUNCTION	1~59SEC, CONTINUOUS TIMING ESTABLISHMENT POSSIBILITY
	BACK-UP	CONVENTIONAL VCR, TIME LAPS VCR (VCR OUTPUT PROVIDED)
		REMOTE BACK-UP USING TCP/IP
		INTERNAL BACK-UP(MARK IMAGE)
	OTHERS	RS232C, RS485, MAX 4 ALARM INPUT
OTHER	CAMERA CONTROL	PAN/TILT/ZOOM AND FOCUS
		REMOTE CONTROL : EXTERNAL EQUIPMENT, WIPER,PUMP,FAN AND
FUNCTION
		HEATER
	CONFIGURATION	PLUG&PLAY
	2 HDD	INTERNAL 1 OR 2 HDD
		ACCEPT MIXED USAGE OF HDD FROM DIFFERENT MANUFACTURERS
AUDIO	Input	4CH INPUT 1.7VP-P, 47K OHM UNBALANCED (MONO PHONE JACK)
	Output	1 OUTPUT, 3.4VP-P, 600 OHM UNBALANCED (MONO PHONE JACK)
	OPERATION TEMPERATURE	41F~ 104F (5C~ +40C)
	OPERATION HUMIDITY	LESS THAN 90%
MECHANICAL	IR REMOTE CONTROLLER	BUILT-IN
	DIMENSION	13 INCHES IN WIDTH 445 mm x 415 mm x 130 mm
	WEIGHT	APPROX. 5KG (HDD 1EA)
	POWER SUPPLY	DC ADAPTER (12V DC 4.5A)

ALL ABOUT IMAGE RECOGNITION & PROCESSING

1. About this document

Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this

User’s Manual. Pay particular attention to the parts that are marked NOTICE.

Also, when connecting with external application, first turn the power OFF and follow manual

instruction for appropriate installation.

2. Before reading this document

1.This document is intended for both the administrator and users of stand alone DVMR Model.

2.This manual contains information for configuring, managing and using stand alone DVMR Model.

3.To prevent fire or electrical shock, do not expose the product to heat or moisture

4.Be sure to read this manual before using stand alone DVMR Model.

5.For questions and technical assistance of this product, contact your local dealer.

Strong recommendation on installation of the DVMR unit

1.Check electricity at the place you want to install the DVMR unit is stable and meets our electricity requirements.

Unstable electricity will cause malfunction of the unit or give critical damage to the unit.

2.Several chips on the main board of the DVMR unit and hard disk drive inside the unit generate heat, and it must be properly discharged.

Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close up an opening (fresh air in-take) on the right side of the unit..

3.Put the DVMR unit at well-ventilated place and do not put heat-generating objects on the unit. When it is installed inside 19 inch mounting rack together with other devices, please check built- in ventilation fan of the rack is properly running.

2