ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
8. MISCELLANEOUS SETUP
1 BUZZER SETUP : Sets different kinds of BUZZER ON/OFF.
BUZZER SETUP is available for each group as follows. SYSTEM BUZZER : All of followings
BUTTON BUZZER : Buzz when button is pressed
ALARM BUZZER : Buzz when alarm is activated
MOTION BUZZER : Buzz when motion is detected
LOSS BUZZER : Buss when video is lost
You can set all buzzer at ON or OFF at once by setting SYSTEM BUZZER or each group of BUZZER independently by setting from BUTTON BUZZER to LOSS BUZZER one by one. Any way, BUZZER is activated just in case you set at ON in corresponding group of BUZZER SETUP.
2ID/PW SETUP : Sets User ID and PASSWORD.
5. Operation
MISCELLANEOUS SETUP
BUZZER SETUP |
| 1 |
| 2 | |
ID/PW SETUP |
| |
SCHEDULE REC SETUP | 3 | |
PANTILT CMD SETUP | 4 | |
HDD INFORMATION |
| 5 |
MARK IMAGE SETUP | 6 | |
PRODUCT ID |
| 7 |
|
| |
SELECT | , PRESS |
|
MISCELLANEOUS SETUP
4. Installation
3) Monitor (S-VHS) Connection
Connect
If you enter into SETUP menu with USER ID, you have a certain limitation in parameter setting.
You can not change setting fro recording or other important parameters with USER ID.
|
|
|
|
| V | VIDEO | VIDEO | VIDEO | |||
CH1 | CH2 | CH3 | CH4 | VCR | G |
| A |
| B |
| C |
|
|
|
|
| A | IN | OUT | IN | OUT | IN | OUT |
Only in case you entered into SETUP menu with ADMIN ID, you can change all settings including recording parameters.
SYSTEM SETUP |
|
|
|
DISPLAY SETUP |
|
|
|
CAMERA TITLE |
|
|
|
TIME/DATE SETUP |
|
|
|
ALARM/MOTION SETUP |
|
|
|
RECORD SETUP |
|
|
|
TCP/IP SETUP |
| BUZZER SETUP | |
MISCELLANEOUS |
| ID/PW SETUP |
|
FACTORY DEFAULT |
| SCHEDULE REC SETUP |
|
|
| PANTILT CMD SETUP | |
|
| HDD INFORMATION | |
|
| MARK IMAGE SETUP | |
|
| PRODUCT ID | |
|
|
|
|
ID/PW SETUP
ID |
| PW | < USER | > |
CURRENT | < | > | ||
NEW |
| PW | < | > |
CONFIRM | PW | < | > | |
1,2,3,4 | : INPUT PASSWORD |
| ||
MARK | : ERASE PASSWORD |
| ||
SELECT 
, PRESS ENTER
ID/PW SETUP
LOOP |
| MONITOR |
|
4) VCR & VIDEO PRINTER Connection
Connect VCR or VIDEO PRINTER to VCR OUT on the Rear Panel of the system.
VCR
1)In ID/PW SETUP, first select kind of ID, that are, USER or ADMIN, by pressing [ENTER] button.
2)With [UP] and [DOWN] button, move to CURRENT PW and press [ENTER] button and then input current
password. After input password, press [ENTER] button again.
Then move to NEW PW by pressing [DOWN] button. And press [ENTER] to input new password to which you want to change. Then press [ENTER] button.
Then move to CONFIRM PW and input new password again to confirm it.
3)Password you will input must consist of 1 to 8 digits number and each digit is from 1 to 4. You can not use other buttons on the front panel for password.
Notice : In the very first setup stage, the ADMIN PASSWORD is “1”, and USER PASSWORD is “2”.
Change PASSWORD as soon as this product is purchased.
25
V
CH1 CH2 CH3 CH4 VCR G
A
LOOP
MONITOR 
VIDEO PRINTER
6